What would cause the turn signal lights on a 1992 Explorer to light up but not flash The emergency flashers work but the turn signals will not flash?
either a bulb or the signal flasher relay located on the fuse panel usually opposite the hazard flasher relay
this car may have separate flashers for the turn signals and the emergency flashers
What would fix emergency 4-way flasher in a 98 VW Jetta TDI when the outside lights won't flash but the red indicator light on the module lights up steadily and turn signals are normal?
4 way flashers and turn signals both have a "flasher can" in the system to make the lights flash the turn signal and 4 way flashers are controlled independantly of each other try replacing the flasher can for the 4 way flashers it is obvious that the bulbs are ok because they work on turn signals
What year?? Need more info. What year. on a 92 lumina Give a dam SHHIT
Some cars have two flashers, one for the signals and the other for the emergency flashers. Be sure you replaced the right one. Also check the fuse the bulbs and lastly the signal switch.
The emergency flashers and the signal lights are separate systems. Each has it's own fuse, switch and flasher relay. If your turn signals light up but don't blink I would blame the signal flasher relay.
Why would both turn signals go on in the back when only the left one is activated in a 1998 Ford Taurus?
The emergency flashers are "ON". The two wires that feed the lights are shorted together. Check the front turn signals also for both being "ON"
The first thing I would check is your 'flashers'. Most vehicles come equipped with two: one for the hazard lights and one for the turn signals. Flashers are usually round, but come in various shapes. Normally located in your fuse panel.
Why would the brake lights tail lights and turn signals not work on your 1985 Volvo 240 if emergency flashers are operational and fuses and bulbs are good?
I am having the same trouble. My brake lights work with the light switch for nighttime driving, but only far right brake light works when i pres brake pedal. Reverse lights dont work at all. Turn signals and hazard light work.
What is wrong when both of your turn signals stop working and when you turn on your emergency flashers nothing happens on a 1995 Chevy lumina car?
Answer Defective emergency lights flasher relay. I had the same problem and I had to buy a new turn signal switch that you have to take off the steering wheel to get to it
Why did my headlights taillights and dash lights stopped working when flashers brake and turn signals work fine what happened?
in dash lights
No. These lights are only to used in an emergency just turn your headlights on low beam.
hazards and turn signals have separate flashers. replace flasher for turn signals
Your emergency lights are on.
Turn on your flashers to help the emergency vehicle. If the emergency vehicle is moving and has a siren running, pull over to the side of the road.
Why don't the brake lights work when tail lights turn signals emergency flashers and 3rd brake light do on my 1996 Chevy Monte Carlo?
First thing I'd check would be the fuse for the stop lights. If it is okay the next thing I'd check would be the stoplight switch located under the dash where the brake pedal is suspended.
Could be the bulbs or the fuses or the flashers or the signal switch assembly
Usally the triangle is emergency signal lights, or flashers.
Could be your emergency lights/flashers are on.
depends on which lights? inside over head? /Dash board?/Doors? /front headlights?/Flashers?/ turn signals?/ Backing lights?/ Parking lights?/ So which ones ? what Year??
you may have blown the computer chip that regulates your lights its usually your hazard lights button that's the chip.
You have an 1991 dodge shadow es with a 5 speed trans your problem is that you have no turn signals your head lights brake lights and flashers work no turn signals you changed all light bulbs an fuses?
Probably the turn signal flasher
Start by checkin all fuses and then go through all your wirein to rear lights and the check build recepticals for wear and corosion..
If Your flashers work but your turn signals don't is the problem in the steering column or is it a relay?
Probably a wiring issue between the turn signal and the lights.
It is your multifunction switch that has gone out. It is located in the steering column. I used my emergency lights and it blew out brake lights, turn signals, and emergency lights. In newer models Chevy did a recall not so for our older models. Mine is a 1995.
1994 Mercury Cougar has no tail lights or rear turn signals ALL other lights and flashers work License plate lights work back-up rear light work?
Check your fuses.
Police lights are the red and blue lights that use in an emergency. It was invented by a Superintendent of Signals for the Police Department of Detroit in 1920.
What causes both turn signal lights to flash when either signal is turned on and to stop when brake is applied only when lights are on?
It depends on the car. Some cars require that you turn on the turn signals to make the 4-way flasher work. If that's the case with your vehicle, make sure the emergency flashers aren't on. Otherwise, it's probably a problem with the turn signal switch.
The only thing that will work with key OFF is the brake lights,head lights and emergency flashers. Dome light will also work.
Hazard warning lights meaning you have 4 way flashers on ( all turn signals are on at once)
Could be a couple of things. If none of your turn signals work, the flasher has probably died. Try turning on your 4 way (emergency) lights. Do they all work? If so, the bulbs should be OK. There are usually two flashers, one for the turn signals and another for the 4 ways. While you're changing one, you might as well change the other one at the same time. I can't tell you exactly where… Read More
A common problem.I hope you mean lights on the dash & no signals outside the car.Simple blown bulb or bulb not making contact inside the socket.I've done this on many of my cars.
Hazard lights out on 1992 GMC Sierra Signals work brake lights work could it be a relay If not what else?
Fuse or 4 way flasher unit there are 2 flashers on for turns one for 4 ways
Very top is ABS, next two down are marker lights, next two down from that are flashers/turn signals, bottom is brake lights, center is ground.
99 Chevy lumina and your two brake lights don't work but the middle one does what could be the problem?
TRY TURNING THE EMERGENCY FLASHERS ON AND OFF A COUPLE TIMES THEN CHECK YOUR BRAKE LIGHTS. WORKED FOR ME.
To be used in an emergency or when you are broke down on the highway. The flashing lights warn other drivers that your car is not moving. This helps prevent an accident. The were originally called emergency flashers for a reason.
Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one. Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.
Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher you need to replace the blinker flasher unit it is different from the hazard unit they cost about 4 bucks the flasher unit is the big round thing in the fuse panel in the dashboard
Why does the turn signal fuse on a 1996 Chevy S-10 blazer keep blowing but the emergency flashers work fine?
Because the turn signals are a completely separate curcuit from the emergency 4 way lights. The turn signal wiring has a short that causes the fuse to blow out. In order to find that short, you need a technician that specialises in electrical wiring repairs, because you could spend days trying to find it and fail. It will cost some money but less than the value of the truck, or a traffic ticket for "no… Read More
Well if they won't work at the same time it's probably because your car has seperate flashers for the turn signal and emergency lights. Or maybe it's just some kind of fuse. Sorry if this was not the answer you were looking for. Anyways, I am happy to help! :)
Sounds like a bad connection or a bad relay.
1991 Dodge Dynasty has no stop lights no turn signals no flashers All the fuses are good Any suggestions?
I have a '92 Dynasty and the turn signals quit working. The manual said that this happens because of a burnt-out bulb somewhere. Did you check those?
Is the TNS relay in the fuse box under the hood a 'turn signal relay' and if so could that be the reason the turn signals and emergency flashers will not work on a 1999 Mazda 626?
The TNS relay in my '99 626 is blown, causing the dash lights, front & back parking lights, and taillights to not work. Turn signals and hazard lights still work. Quick test: The A/C relay is exactly the same part. You can swap relays to check the TNS relay. Be warned that swapping relays can result in more damage if a short caused the first one to blow. Doc
Once you have stopped for a school bus do not pass until the driver signals you to proceed the red lights stop flashing or?
No, you legally should NOT move until the flashers stop and if there is a stop sign on the bus that it has been retracted. It doesn't matter if a bus driver flags you to go... or signals you to go. If those flashers are red or orange---keep your foot solidly on the brake. Go when the flashers and stop-sign end, AND you can see no other dangers, like a kid in the roadway.
Why do I have no running lights front or back and no tail lights- head lamps signals and flashers work fine-1989 Jeep Cherokee Laredo?
Your Electronic Ignition Switch is bad. It is located on the inside of the jeep under your steering column.
If the hazard flashers on a 1985 Dodge 6 SE work but the turn signals don't what would be the problem?
Flasher relay bad. This is a separate flasher relay from the one controlling the hazard lights.
Check the bulbs - they are doubloe filamented with the smaller being for brake/turn signals Check the fuses
The flasher relay is more than likely defective. One flasher controls both the turn signals and the hazard lights. It is located on the driver side, behind dash, mounted above kick panel.
1998 Chev Lumina your rear lower brake lights do not work The upper rear brake light works If you push the emergency flashers the lower brake lights start to work againWhat can be the problem you were?
It's the turn signal switch which is the culprit.
It is probably a reference to a system which (if it is installed) "reads" signals from authorized emergency vehcles (law enforcement, EMS or FD) and automatically changes the intersection traffic lights to favor the direction in which the emergency vehicle is travelling.
generally the tail light fuse is the same fuse as the turn signals