answersLogoWhite

0


Best Answer

the wires maybe fired because it's a 1997 it could be used alot.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What would cause the windshield wipers to operate with the control switch in the off position on a 1997 Ford F150?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you fix a windshield wiper switch on a 1995 Buick Riviera that remains on when in the off position?

If a windshield wiper switch on a 1995 Buick Riviera stays on when in the off position, it might be the fault of the windshield wiper relay. It could also be that the switch itself needs to be taken off and reset on the dial.


What maintains normal windshield temperature control in an electrically heated windshield system?

thermal overheat switch


Can you use a toggle switch to turn your windshield wipers on and off?

Yes you can. I did it to my 91 s10 however you wont have control over your wiper speed since its only a two position switch on/off. I have a 3 position switch on/off/on one for slow and one for high however I have not tried this out yet.


Where is wiper switch headlights 2000 S80?

that switch does not exist. It simply is activated when you spray your windshield washer fluid onto the windshield. Your headlight switch has to be on. I know your lights are always on, however the wipers for your headlights will only activated if the headlight switch is in the on position.


How do you operate cruise control on a 2003 Chevy Blazer?

The cruise control switch should be on the turn signal control arm. There is a three position switch; off, on and resume are the three positions; "off" to your left, "resume" to the right and "on" in the center when you are sitting in the drivers seat looking at the switch. The switch needs to be in the on position and when you reach the speed you wish to "cruise" push and briefly hold in the button on the end of the turn signal control arm; the "set" button. This should engage the cruise control, to accelerate you can push the three position switch to the resume position until you have reached the speed you want to change to and to decelerate you can push the set button. Do not relase the resume switch to quickly, it is a spring loaded position, a momentary switch, and the spring may have enough strength to push the switch past the on position to the off position if released quickly. The resume can be used to return to a set speed after braking or clutching as touching the brakes or the clutch if a manual transmission model will disengage the cruise control. Hope this helps.


How does a remote control operate a switch from a distance?

The remote control sends a radio signal to the base unit, and the base unit interprets the signal to switch the connected appliance on or off. Some remote control can operate multiple switches from a distance.


Where is the windshield wiper control board on a 1997 Chevy s-10?

There isn't a control board - the controls are all in the switch.


How do I replace the windshield wiper switch?

How do I replace the windshield wiper switch?


How do you operate headlight washers a4 2003?

Switch on the headlights. Hit the windshield washer stalk, wipers and wash will come on, as will the headlight wash.


Where is headlight wipers button for Volvo s60?

There is no button to operate the headlight wipers. The headlights washers and wipers are activated along with the windshield wipers when you use the windshield washer by pulling the wiper switch towards you.


Does lamp in off position use electricity?

No. When the switch is open, off position, no current flows. The light needs current to operate.


Why do the windshield wipers go on and off 1996 Dodge Grand Caravan?

The wiper motor has a switch inside of it. When they are turned off and the wipers go to the down position it trips the switch in the motor that tells the computer they are in the down position. If that switch in the motor is faulty, the wipers are repositioning until the switch is tripped to the off position. THE FIX.... Replace the wiper motor.