Without pulling codes, I would quess the Oxygen sensor is weak and needs replacing.
If the engine is revving up, then the transmission is having problems. If the engine is not revving, then check the linkage from the accelerator to the throttle body.
If the a/c will not come on you need to check the a/c clutch relay and the following can cause the a/c to shut off..... When the accelerator pedal is fully depressed. When cranking the engine. At high engine speeds. When the engine coolant temperature becomes excessively high. When operating Power Steering during low engine speed or low vehicle speed. When engine speed is excessively low. When refrigerant pressure is excessively low or high.
If the a/c will not come on you need to check the a/c clutch relay and the following can cause the a/c to shut off..... When the accelerator pedal is fully depressed. When cranking the engine. At high engine speeds. When the engine coolant temperature becomes excessively high. When operating power steering during low engine speed or low vehicle speed. When engine speed is excessively low. When refrigerant pressure is excessively low or high.
Check for obstructions like floor mats and junk that are effecting the accelerator pedal operation. Also check for sticky or binding accelerator pedal cable and/or throttle body linkage. If the check engine light is illuminated you can have your local auto parts store scan for codes that may lead you to the cause of the problem.
well with any vehicle if the engine is accelerating usually its a linkage problem meaning your linkage is getting stuck somewhere check that first
check your accelerator...
Yes, an unplugged sensor can cause a check engine light.
No, oil level does not cause the check engine light.
no a burnt out headlight will not cause a check engine light but if you go to most of the part places they will check the check engine light for free
Yes, water can cause a misfire, which will cause the check engine light to flash.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
Check for vacuum leaks, starting with the power brake booster.