According to Toyota repair manual.... during assembly being carefull of camshaft alignment marks in relationship to crankshaft or damage to engine will occur..
It depends on what you want to fix.
It is non-interference. I think some mechanics say it is an interference type because one of the major repair manuals incorrectly states that it is interference, it is not...
According to my Chilton repair manual , the crankshaft position sensor is used to determine crankshaft position and crankshaft RPM
There is no way to repair a hymen without surgery.
Goto autozone .com and look in repair info
No, from talking to repair shops and a dealer about my own Saturn Ion-2, I have learned that it does in fact use an interference design.
Yes, it does have an interference engine. So be sure to check and replace you timing belt often to avoid VERY costly repair.
Get a manual on your car from DISCOUNTAUTOREPAIRMANUALS.COM and it will help on the next repair.
Replace, flush, or repair, depending on what the problem is.
2000 suzuki vitara 2.0 crankshaft sensor
If the problem was not there before the repair then I would be looking at the repair itself. Could the pistons be installed backwards? Was it the correct crankshaft without a doubt? Did you match the casting numbers? Balancers only give a problem if the rubber between the 2 pieces comes out.
If your Ford Contour 2000 keeps leaking water and its anti-freeze, you will need to repair your head gasket.
do not repair, replace it only ! For explicit instruction as to procedure, please refer to answer for 1999 ISUZU RODEO crankshaft in automotive section herein.
No, there is no repair if it it clogged. Replace it.
haynes repair manual about 20$ AUTOZONE
You can look that up in a car repair manual Chilton to see if it is an interference or non-interference motor.
You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00
A machine shop can repair it if it is not damaged too severly. You may end up having to use oversize bearings. If it were me, I would replace it if it has very much damage.
You repair a collapsed clay sewer pipe without digging by Pipe pulling.
A geochemist studies the earth by using geology and chemistry. Their goal is to repair or minimize damage to the environment that is caused by human interference.
first thing is check the fuse then the resistor bank before messing with motor
this sounds like the big end bearings in engine are worn.this is an expensive repair,depending on how long the knocking has been knocking and whether the crankshaft has been damaged enought to need a new crankshaft.
you cant repair the speaker without destroying the tablet PC