My problem on the 88 I was working on turned out to be the crank position sensor located on the driver side top of the bell housing.
It can be the ciner on bellhousin or bad coil
probably have a bad crank sensor, so the computer isn't being told when to fire the plugs
ignition modulator
The hampster's dead
Bad coil or coil pack.
im not getting fire to the spark plugs but the distributor is getting fire what do i do please help
The spark travels from the coil to the distributor then from the distributor to the plugs. So if you have spark going into the distributor but not coming out to the plugs, I would blame the distributor cap and rotor being at fault.
No fire going to the plugs from distributor have fire up to the module none coming out what do I check for next
coil, distributor, distributor cap, plugs, or wires.
Fuel pump, battery, starter, or no gas. or crankshaftsensor
they either roast it or boil it over a fire with sticks
Replace the coil