No fire going to the plugs from distributor have fire up to the module none coming out what do I check for next
The ignition module is located in the distributor under the rotor, it plugs in.
The ignition module is located in the distributor under the rotor, it plugs in.
the ignition module is on the distributer(the thing all the spark plugs wires go to)
its inside the distributor cap should have two-three plugs going to it, it is about the same size as a domino(black).
its attached to the distributor, right at the base, should have two electrical plugs going into it, one from the coil
ignition module is located under the distributor, where the spark plugs come out to go to the spark plugs, remove 6 bolts that hold the 3 capped distributor on, unplug the wires from both ends of module, 3 plugs, lift module out, nothing holds it in after distributor is removed, plug new module in, replace distributor.
If a defective ignition module, (or bad plugs/ wires) causes a misfire condition, one or more plugs won't fire. The uneven power pulses cause engine shaking.
Please check your spark plugs,wires,distributor and rotor or the ignition coil module. My '93 LX has an ignition coil module.
At the front of the engine, behind a plastic cover, just above the exhaust manifold. There are 4 clips that hold the cover to the ignition module. Under the cover, there are 2 bolts that secure the ignition module to the engine. Disconnect the wiring plug on the end of the ignition module. Undo the bolts and use them to extract the module, then remove the plugs as normal.
Your ignition module may be out. Or your distributor is out. What kind of vehicle?
The ignition module is right underneath the ignition coils. The ignition coils are what the spark plugs attach to. My alro was riding really rough so i just changed my coils and module for $200 and it runs like new. All you do is unplug the wires, unscrew the coils(6 bolts) and there is your module. :) Hope this helps!!
inside the distributor cap. there should be 2 sets of plugs that go to your distributor, those plugs go directly into ur ignitions module