0
What else can I help you with?
How you make a girlfriend?
Get to know them and then slowly start flirting with her.
How do you jump start a manual car?
Just make sure the gear stick is in neutral and the hand brake (parking brake) is on. Then try to jump start it as you would do with an automatic car.
Will not start without starter fluid and as soon as its put into gear it cuts off?
The year, make, model and engine info would help.
What would make a car start to lose acceleration when in first and second gear?
Could be: a clogged fuel or air filter a plugged catalytic converter
Why wont my dirt bike start in gear when the clutch is pulled in but it will start in neutral?
Make sure the sidestand is retracted.
On Bin Weevils how can you get your bin pet to jump?
all you needc to do is make your pet look at you and then YOU jump and slowly, slowly your pet will start to jump!
Why does banging on a starter make the car start?
There may be corrosion on the brushes in the starter and banging it would shift this temporarily Also it could be that the gear has jammed on the flywheel banging it can release this.
What would make a 2004 Chrysler Sebring automatic not go into gear?
start by checking your transmission fluid level. car has to be running transmission hot and in park on level ground to make sure you get an accurate reading
Why does your lawnmower make a grinding noise when you start it?
If the mower has an electric starter, the gear on the starter is worn. Replacement is not hard and the part (a plastic gear) is relatively inexpensive.
What is the difference between 4.56 gears and 4.88 gears?
A very basic way to look at it is this..... With 4.56 gears, the driveshaft will have to turn 4.56 times in order for your tires to make one full rotation. With 4.88 gears, your driveshaft will have to go around 4.88 times for your tires to make one full rotation. Basically, the higher the number, the more rotations the driveshaft will make. On a 10 speed bike, you would climb a steep hill in 1st gear.... lots of pedaling to get the rear tire to move- it would move slowly, but you would have lots of hill climbing power. 4.88 gears would be similar to 1st gear on a 10 speed bike.... 4.56 gears would be similar to 2nd gear....4.10 gears would be similar to 3rd gear....etc.
Why does your 91 Buick LeSabre make a grinding sound when you turn the ignition key but does not even begin to turn over or start?
Don't do that too often. If the starter Bendix is not fully engaging the starter gear into the flywheel, you could be wearing the flywheel. That could be expensive. Remove the starter and inspect the flywheel. Slowly turn the flywheel by hand and inspect the entire circumference of the gear.
How do you make Wrestling Gear?
You can make wrestling gear any way you would like. You should use other wrestler's outfits as inspiration for your own designs.
