Fuse number 23 in the passenger compartment box is blown. It caused the following devices to stop working: Door lock switches (but not the locks), Interior lights, radio lights, A/C climate control, overhead console quit.
The most common cause for a cruise control that stops working is that the electrical components or switches have stopped working. Sometimes taking it apart and cleaning the contacts will fix the problem.?æ
2004 mercury grand marquis fan stop working
switches for my aircondition Isuzu ascender
I have trouble understanding your question. But I think you are saying that you have two switches that control one light and want to know why it is not working. More than likely is that you have two way switches instead of 3 way switches installed. 3 three switches cost a little more and are a little more difficult to install but if you recently replaced these switches you may have replaced them with the wrong type.
troubleshoot head lamps on 1988 grand marquis? Not working...fuses OK
i have no heat in my 1994 mercury grand marquis. what could cause the heat to stop working
Replace the flasher relay if none of them are working.
ECM fault, wiring fault, brake or clutch switch not releasing fully, bad switches.
Yes, you should be able to just replace the switches and get the lamps working again. Go to your local hardware store and they can give advice.
I believe there is no fuse just for the cruise control. The cruise control circuit is covered by the PCM. However, I would check the switches on the brake pedal.
check fuse
I suspect that your Control Unit itself has gone bad. That's what happened to me. A new control unit will cost between $400 and $500. I got one from a Junk Dealer for $100. It's been working for 3 years now. The control is real easy to change out. Hope this helps.