its 2009 you punk, why dont you buy something newer...you better of replacing yourself.
The thermostat on a 2004 Chevy Venture is changed by draining the radiator, removing the upper radiator hose, and unbolting the thermostat housing. The old thermostat and gasket can then be removed and replaced.
I suspect that either your thermostat is plugged with debris from the radiator change or that the thermostat was replaced backwards. The spring side should be towards the block.
This question is not complete. . Need to know if you've replaced radiator, thermostat, hoses etc. Are you asking this question *after* yo checked the thermostat, changed, added or drained the system?
it is a hyndai that's why it is a hyndai that's why
Test gauge function with a mechanical gauge to get actual engine temp.
The thermostat on a 2005 Chevy Equinox is changed by draining the radiator, removing the upper radiator hose, and unbolting the radiator housing. The old thermostat can then be removed, a new gasket installed, and the housing bolted down.
Blown head gasket?
im having the same problem with my 1994 I've replaced the heater core,thermostat,radiator,i checked the coolant, and it's not over heating or nothing and still no heat lol
The thermostat on a Chrysler PT Cruiser is changed by disconnecting the upper radiator hose, unbolting the thermostat housing, and removing the thermostat. A new unit can then be put in place and reattached.
water pump. thermostat.
Check your oil and see if it's milky. If it is then it's leaking inside. Does it steam out of the tailpipe? If it does you have a bad head or head gasket. have you replaced the thermostat? if you haven't, do that first, it may be stuck closed.
Begin by removing the water supply hose from the top of your 1989 Ford F1 50 thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out and drop in the new thermostat.