One would use a Pex Crimper for fitting together and tightening pipes. It would be a good tool for a plumber. It can also be used for inserting a metal bit into a plastic pipe
A crimper iron will not harm your hair as long as you do not overuse it. Make sure your hair is dry when you do use it.
What are my choices?
PEX Supply in your area can tell you about PEX piping in Columbus. They should be able to assist you with materials that you may need and training on how to use them.
No. PEX and PB is different chemical compounds and have different working parameters. As I know usage Polybutilene for water supply system is not allowed in US. Use PEX tubing for plumbing.
Wet the edges to be sealed and use the tines of a fork.
No, you'll need to put a pipe adapter on the PVC, then use a standard PEX crimp fitting. Or you can use a SharkBite fitting. They work well for this.
yes it will handle the heat as long as your boiler is started with copper
You can, but it's much easier and cheaper to use PEX.
for a 3/4" supply use a 3/4" PEX x 3/4" NPT Brass F Adapter
To avoid corrosion in heating and radiant heating systems, oxygen barrier PEX must be used. Do not use non-barrier PEX for your heating project if you have any cast iron in the system. Source: PexUniverse.com (Learning Center)
The copper should fit in the Pex fitting. My mistake, Pex uses the crimp rings. There is a coupling and other fitting that you just push the pipe into and it grabs and seal the pipe. Pex, pvc, copper, all will fit. Just use a coupling between the copper and the pex. I had my doubts the first time I used this, but it does work and doesn't leak. Just make sure that the pipe bottoms out in the connection.
PEX is a very durable and flexible pipe made from crosslinked polyethylene. It's resistant to scale and chlorine and can't corrode. It's much easier to install than copper or any rigid plastic pipe. It's easy to cut, bend and couple up. It has a huge series of brass fittings . I love working with PEX and have repaired and even re-piped whole houses with it.Old fashioned plumbers often 'trash-talk' PEX as it takes away the 'mystery' about soldering etc. You don't have to be a traditional plumber to use PEX. I learned all about PEX as a well technician.