The First Known/Recorded Use Of Damper Was In 1707, it was mostly eaten by Stockmen.
J. Brunander, 1926 in Portland, Oregon
In the event of fire, the fusible link melts and the shutter gets closed. This helps in blocking the fire from spreading through the duct ----- If you are asking about a damper on a stove or chimney, that is not called a fire damper, but just a damper. There is a link to a question on that below.
which year was the circuit breaker invented? was it year 1924 or year 1925?
No they were invented last year ago
1233
Virgie ammons invented the fireplace damper in September 30,1975
J. Brunander, 1926 in Portland, Oregon
AKA, crank pulley damper, crankshaft damper, torsional damper, or vibration damper.
were is the damper on a furance
well they pick grass and put it in the damper and mix it and it becomes damper
Honda calls it a damper. If you want the front damper. Remove the brake hose clamps from the damper remove the damper pinch bolt (on the bottom). Remove the damper fork bolt. then remove the damper by removing the two 10 mm nuts on top. Do not try to Disassemble the Damper without a spring compressor.
damper is a Australian bread.That is a type of food from Australia.
A damper will help to reach the damper without getting burned and keep your hands free of soot.
A thermal actualized damper is a damper that is used in fireplaces and woodstoves that adjust the damper according to the temperature. They are somewhat inconsistant as far as reliability so make sure you research and find a good one.
A top damper or cap damper is a metal spring door placed at the top of the chimney with a long metal chain that allows one to open and close the damper from the fire place.
the year tv was invented
what year was Chilaquiles invented