When 1cc of water is converted into steam how much is the volume of converted steam?

How much does water expand when it turns to steam?

At 212 degrees Fahrenheit water expands approximately 1,700 its original volume when converted to steam.

How much steam will 100 lbs of water make?

100 lbs of steam. The volume that the steam will occupy will depend on the pressure.

How much steam to make 1 ton of condensate?

1 ton of steam. how much steam is vague question. steam can be at different pressures and saturations. At 212°F, 14.7 psia, liquid water has a specific volume of 0.016716 ft3/lbm and steam has a specfic volume of 26.80 3/lbm, which is a volume ratio of ~1603 : 1 of steam:water.

How much does steam expand?

Water weighs 1kg per liter. If it is all turned to steam you will have 1kg of steam. Water expands to nearly 1700 times its original volume at 212 degrees.

How would the volume of the water and the volume of the steam compare to the volume of an original ice cube?

The volume of the water was about the same as the volume of the ice, but the volume of the steam was much greater. Copyright © 2012 Study Island - All rights reserved. Copyright © 2012 Study Island - All rights reserved.

Why does steam weigh less than water?

Both steam and liquid water are made of the same substance (H2O). However, in the gaseous form (steam), the molecules are moving more quickly, and they are spread apart much farther. As such, the number of molecules per given volume (the mass per volume) is lower for steam. Mass per volume is the same thing as density.

When 30 grams of water is converted into steam how much heat is absorbed?

q = mHvq = heatm = mass (30g)Hv = heat of vaporization (2,260J/g)q = (30g)(2,260J/g)q = 67,800JWhen 30 grams of water is converted into steam, how much heat is absorbed?67,800J of heat, also represented as 67.8kJ of heat is absorbed.

Is steam hotter than boiling water?

Technically speaking steam has a higher temperature, but boiling water often has more heat energy per volume. Steam starts at 100degrees C, which is the absolute maximum temperature of boiling water, but steam can be much much hotter, all the way up to thousands of degrees. However, steam as a gas is much less dense than water, and so steam at 100C will injure a person much less than water at 100C.

How much is1 tone steam to cubic meter?

for converting cubic meter to ton , density or specific volume is needed. specific volume unite is m3/kg. steam cubic meter/ (cubic meter/kg)= steam (kg ) /1000= tone of steam

Steam at 100 C contains the same amount of heat energy per gram as liquid water at 100 C?

For a given mass, steam will have more energy than water. The difference is called the 'heat of vaporization'. One thing to be carefuls about, of course, is that a given mass of steam will occupy much more volume than the same mass of water.

How much heating power is delivered to a load?

There is no specific ratio, as it depends on the pressure and temperature of the steam. Steam is merely water vapor, at a temperature above the boiling point of water (212 degrees F., 100 degrees C.). When water boils, and turns to steam, the steam will occupy a volume 1846 times that of the water that was converted -- at atmospheric pressure, and at the boiling point of water. Such steam is useful in cooking, for example, to steam vegetables. But in general, it is not very useful at this low pressure. Steam used in industrial processes or to drive engines or turbines, is at much higher pressures. Those pressures are obtained by vaporizing water in a closed vessel, so that the steam is allowed to occupy a volume much less than the 1846 times ratio just noted. Steam in closed vessels can build up to enormous pressures, which ultimately can rupture the vessel. Fragments ejected as shrapnel from such an explosion can have more striking power than a bullet or a cannon shell. Perhaps worse, the released steam contains enormous energy, which can for example scald a human to death almost instantly. For that reason, steam generators are provided with valves which release the steam when a desired pressure is reached. They are provided also with blowoff valves, which open at a somewhat higher pressure, in the event that the orifice or pipe through which steam is withdrawn may not be of sufficient size. Such blowoff valves vent the steam chamber into the atmosphere, or into a condensation chamber. The steam vessels are designed to withstand a pressure usually twice or more the level of pressure that triggers the blowoff valve; this is a safety measure. Because the ratio of water to steam varies, according to pressure and temperature of the steam (and whether it is "wet" steam or "dry" steam), it is more common to speak of pounds of steam. This is the weight of the water converted into steam (of the desired pressure and temperature) in a given time, such as pounds per hour. Water, as you may know, weighs 8.33 pounds per gallon. Knowing the weight of the steam is important, for example in running a steam turbine. The weight of the steam, and its velocity, determine the momentum of the steam; and that can be translated into the force or torque applied to the turbine rotor, thus the output of the turbine. That in turn translates into how many kw. of electricity the turbine-generator can produce per hour. Such computations actually get pretty complicated, but you can see that there is a relationship between the amount of water converted into steam, and the output of an engine or turbine or generator which is driven by that steam. There is a specific field of engineering (and physics) which deals with steam. It is called Thermodynamics, It is essential in designing steam boilers and steam-powered equipment.

How much water is requried to condense per ton of steam?

50 times of steam