0
When I turn the key to start my 1990 Honda Accord it it turns over but As soon as I let the key go to the run position it just stops Do you have a diagnosis Is it the ignition switch?
Wiki User
∙ 9y ago
The engine should run when you let the key go. The switch is most likely bad and will need to be replaced.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How do you change ignition switch on a 93 Honda Accord?
how to change manual ignition switch on a 93 Honda accord
Why does 1994 Honda Accord Engine run when switch is in start position but not in run position?
ignition swithc could be broken, I suggest you have it looked at to be sure
How do you reset the oil light 2001 honda accord?
With the ignition switch off, press and hold the odometer reset button in, then turn the ignition switch to the on position but do not start the engine. After around 5 seconds the maintenance required light will go out.
Do you have to turn on the switch to reset the tire pressure light?
Yes, the ignition switch must be in the ignition position -not- the accessory position.
Do you need to remove the ignition lock to replace the ignition switch on a 94 Honda Accord LX?
no the switch can be independly remove from the back side of the ignition lock
How do I reset the maintenance needed light on my 2003 Honda Accord?
Turn the ignition switch to off. Now push and hold the odometer reset button in, now turn the ignition switch to the on position, wait from 10-15 second and the light should go off. Release the reset button an turn the ignition switch off.
How do you turn off a2000 Honda accord maint required light?
With the ignition switch in the off position, press and hold the odometer reset button while at the same time turning the ignition to the on position. After a few seconds the maintenance required light will go out.
1991 Honda Accord engine cuts out while driving?
Ignition switch
Why won't my ignition switch turn back into lock position after changing the ignition switch?
Ur life suck that why
How do you turn on the Honda Accord?
Turn the ignition switch clockwise until it starts, then release.
True or false the START ignition switch position activates only the starter motor?
It is false that the stat ignition switch position only activates the starter motor.
How do you reset maintenance light on 93 Honda Accord?
Push and hold the odometer reset button while at the same time turning the ignition switch to the on position. After about 5 seconds the light will reset.
