Want this question answered?
Adding a mordant the color resistance on tissues is improved.
Resistance doesn't have a 'purpose'; it exists whether you want it or not. You can modify it by adding more resistance in series or in parallel, but you can't avoid it!
A decrease in current.
air resistance will increase the time for an object to fall to the ground
This is a very technical electrical question that may be difficult to understand without further study. But adding appliances to an outlet is the same as adding resistance in parallel. Adding resistance in parallel, the resistance of the circuit goes down. That is why you get more current flow. By contrast, adding resistance in series increases the resistance of the circuit and therefore reduces current, all else being equal.
Yes. The current is inversely proportional to the resistance. I = V / R where I is current, V is voltage, and R is resistance. Adding light bulbs adds resistance. Current is constant throughout a series circuit; it doesn't change no matter what. Voltage changes.
The total resistance in a series circuit is determined by adding (summing) the individual resistances of each component in the circuit.
you can increase air Resistance by adding more gravity and more air Resistance which is the push that comes from down to up and will cancel out with the gravity eventually!! sorry i thank i messed up hope i helped!
A Resistor Is Used To Limit The Current In A CircuitFurther AnswerA resistor is sometimes used to modify the natural resistance of a circuit -e.g. by adding a resistor in series, you can increase the natural resistance; by adding a resistor in parallel, you can decrease the natural resistance. Two or more resistors can be used to create a voltage divider -a method of obtaining a voltage lower than the supply voltage in a d.c. circuit.Use of resistor is to produce a particular amount of resistance to the flow of current
A Resistor Is Used To Limit The Current In A CircuitFurther AnswerA resistor is sometimes used to modify the natural resistance of a circuit -e.g. by adding a resistor in series, you can increase the natural resistance; by adding a resistor in parallel, you can decrease the natural resistance. Two or more resistors can be used to create a voltage divider -a method of obtaining a voltage lower than the supply voltage in a d.c. circuit.Use of resistor is to produce a particular amount of resistance to the flow of current
As the name implies, resistance resists current. In the mathematical formula, where E is electromotive force (voltage):- I = E/R If you increase the value of R (resistance), then the value of I (current) decreases.
by adding external resistance to the shaft of rotor