Want this question answered?
xtau
The first thing you need to do is get a trowel and bucket, to take samples of your soil. You need to capture several samples from different locations around your lot. Most labs will want samples from 3 inches deep. Dig a handful of soil using a trowel and put it in a bucket. Make sure that your trowel does not have any fertilizer residue to avoid contamination of the sample. Then, mix all the samples together in the bucket and measure up 1-2 cups of soil to be submitted.
before begining to farm one should send several soil samples for lab testing. they are testing for soil composition, pH, nutrient levels, organic matter and water permiability
to learn about jupiter
Most fence timber is treated, if you test the soil close to it there is a good chance the soil will be contaminated from the timber preservative leaching from the timber to the soil.
Maybe to prove he went to the moon and they can compare the soil from the moon and soil that is in earth. Same for the rocks comparing them.
xtau
The first thing you need to do is get a trowel and bucket, to take samples of your soil. You need to capture several samples from different locations around your lot. Most labs will want samples from 3 inches deep. Dig a handful of soil using a trowel and put it in a bucket. Make sure that your trowel does not have any fertilizer residue to avoid contamination of the sample. Then, mix all the samples together in the bucket and measure up 1-2 cups of soil to be submitted.
Federal Dept. of Agriculture
geology
before begining to farm one should send several soil samples for lab testing. they are testing for soil composition, pH, nutrient levels, organic matter and water permiability
to learn about jupiter
Lithosphere
Most fence timber is treated, if you test the soil close to it there is a good chance the soil will be contaminated from the timber preservative leaching from the timber to the soil.
you first have to define what type of pollution. Common ones are air, soil and water. GCMS can be used on air sample tubes or sample trains for flue gas. Soil samples are best analysed by ICP-MS for elemental quantitation. Water samples are often analysed by LC-MS, sometimes by GC-MS
The name that you should be looking for is top soil. I believe this is the uppermost layer of any soil.
Because soil is defined as having a particle size of less than 2 mm