Hubs do not recognize frames, it means that hubs basically works as reaper and sends received information to all connected hosts.
Hi all,The main differance between the a switch and Hub is the hub will disribute the data among the system.(For eg: a hub have 8 port and in each system is connected and if a a system send a data of 100 mbps then all the system will share the data among themself and by the end system 100/8 it will send or get around 12.5mbps.) but incase of switch is won't do such things instead it will send the data as the same amount as it sends from the source.
A "Hub".
Port.
Port in hub/switch refers to the interface where you connect your computers.
Computer network Polling is where a client server or Network Hub polls each computer for data. Data can only be sent when the particular computer is polled. If the computer has data to send but is not polled at that time, the data has to be stored until it can be sent. ^_^ JunkCollector ^_^
Switch because it is at least a little intelligent and can send data packets to the correct port.-----------A switch also regenerates the network signal, where a hub does not.
If you connecting a hub to another device then the cable must be placed in the uplink port, or a port that can switch between a client port and an uplink port.
There are no charge to recylce a 24 port ethernet hub.
The "Crossover" port. (or MDI-X)
Hub
A hub resends the signal it receives out through all ports, except the port where it received it.A hub resends the signal it receives out through all ports, except the port where it received it.A hub resends the signal it receives out through all ports, except the port where it received it.A hub resends the signal it receives out through all ports, except the port where it received it.
A FD (flashdrive) is a portable data storage device that uses flash memory. A USB port is a port for a USB cable or anything that has USB capabilities, to plug into. For example, a FD normally plugs into a USB port.