Port in hub/switch refers to the interface where you connect your computers.
If you connecting a hub to another device then the cable must be placed in the uplink port, or a port that can switch between a client port and an uplink port.
Yes. A hub will be one giant collision domain for that entire switch port. So if its an 8 port hub and you have 8 devices connected to it that collision domain will have 8 devices in it.
An Uplink Port is a port on a connectivity device, such as a hub or switch, used to connect it to another connectivity device.
A hub is used in network situations. It provides a central connection for multiple media segments. The hub repeats a signal received on one port and send them to ALL other ports. A hub operates in half duplex mode, meaning that devices can only send when no other devices are sending data. Use a switch when possible.
Switch because it is at least a little intelligent and can send data packets to the correct port.-----------A switch also regenerates the network signal, where a hub does not.
No, it does not come with software.
A switch. Each port has a separate path to each of the other ports on the switch. On a hub, all the ports are tied together into 1 single port. Think of a switch as an 4 lane freeway with 8 entrances and exits; a hub is a one lane highway with the same 8 entrances and exits. It can pass data from only one port to another port- switch can connect 4 ports to the other 4 ports (or 8 to 8 or 16 to 16, you get the idea) A switch is quite a bit more complicated AND is generally more expensive: between 20% and 300% more than a hub with the same number of ports BUT it's very useful on a busy network (business especially.)
You would be looking to buy the Startech.Com 2 Port USB KVM Switch with Network Hub and Audio if it fit your needs and you had the ability to purchase this product.
I don't think it has to be anymore than 2, but it can be quite a few. The problem with a hub say for a computer like a usb hub is that each device receives less power and they are all sharing the same port, its like hooking 5 computers to one modem.
Yes, it does have ethernet capabilities.
It allows access to all four computers at once.
HUB in a collision Domain, Switch in Local Network.Broadcasting in network is done to locate devices in Network. Hub broadcasts through all its port whereas Network Switch Broadcast traffics within a Port & out of all ports only if new device is to be found.