0
A visual or hearing test will show you if your brake pads need replacing. Depending on the brake pads you purchased, you might be able to wait as long as 10,000 miles before having to replace them. Best to have your mechanic check your brakes next time you stop in for an oil change.
What else can I help you with?
Do you need to drain brake fluid when changing brake pads and rotors?
no
Do you need a torque wrench when replacing pads and rotors?
You do not need a torque wrench when replacing brake pads and rotors. Some of the tools needed to change the rotors and pads are the c-clamp, sockets, wrench, grease, and brake cleaner.
Is it necessary to change brake pads when changing rotors?
When rotors need to be changed usually the pads have worn down. It is always a good idea to change pads when changing rotors.
Do you need to replace the brake pads if you are replacing the rotors?
depends on the condition od the pads. If worn or have groves etc from the rotors then replace.
Do you need to grind the rotors when placing new brake pads?
If the rotors are in good condition, not warped, not scratched, then you can replace the pads without turning the rotors. Inspect the rotors carefully.
How many miles before you should change your rotors?
As long as your rotors are not warped, or you have not let the brake pads wear to the point they defaced the rotors, there is no need to change them. Just install new brake pads. Rotors can last the life of the car.
Do you need a scan tool to replace brake pads and rotors on a 2005 XJ8L?
You do not need a scan tool to replace any brake pads. The wear is obvious.
When you brake your Chevy Trailblazer pulsates why?
The brake rotors are warped are out of round. Need to do a brake job and have the rotors turned are replaced. Be sure to install new pads and shoes.
Brake pulsation New hubs and Rotors?
I don't know if you are saying you have the new hubs and rotors and still have pulsation, or if you are asking what causes pulsation. If you have pulsation on slowing this is due to warped rotors, and you need to change the rotors and the brake pads, not the hubs. Not too expensive: 2 rotors and brake pads for my Pontiac is about 55 bucks. DIY of course.
How can I effectively stop disc brakes from squeaking?
To effectively stop disc brakes from squeaking, you can try cleaning the brake pads and rotors, adjusting the brake calipers, and using brake lubricant. If the squeaking persists, you may need to replace the brake pads or rotors.
How do you change brake pads and rotors on 2005 dodge durango with 4 wheel drive?
You will need to remove the tire and wheel from your 2005 Dodge Durango. Remove the brake pad Springs and calipers. Tap the rotors with a hammer to loosen them. Slide the rotors off. Reverse the process to install the new rotors and brake pads.
What is a good website to purchase brake pads and rotors at online?
According to customer reviews the best brake pads and rotors are EBC brake rotors and pads. They are manufactured in Britain and can be found at any auto store including Canadian Tire in Canada.
