0
Low water pressure or cold water main undersized.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What other invention did it lead to?
toilet
What type of lever are knives?
The knife is a third class lever. The pressure is applied to the other end of the handle nearest to the blade and the fulcrum is at the end of the handle nearest to the wrist.
What is ansi b40.1?
ANSI B40.1 has been replaced by ANSI/ASME B40.100-2005Pressure Gauges and Gauge AttachmentsThis Standard (B40.1) is confined to analog, dial-type gauges, which, utilizing elastic elements, mechanically sense pressure and indicate it by means of a pointer moving over a graduated scale. This Standard does not include gauges of special configuration designed for specific applications, edge reading, deadweight or piston gages, or any other gauges not using an elastic element to sense pressure
What is a flange rating?
*Any flange having different MOC bears the rating with respect to international standards like ANSI B16.5.*It is a designed pressure that a flange can withstand.*For example a flange is having the following specification:25NBX150#,FORGED CARBON STEEL as per ANSI B16.5is having 150 psi flange rating.It can withstand 150 psig pressure safely.(Noting that in most cases the pressure-temperature charts of a given spec will allow for normal operating pressure to far exceed the class rating at ambient temperature. For example a 150# flange in A105 Carbon Steel will rate for 285PSI at -20 to 100 Degree F. For more information see www.texasflange.com The original intent was to class the parts to safely hold the given pressure at relatively high temperature. Since often times the operating temperatures are much lower the flanges can usually be used well above their given rate. When in doubt take your design criteria to a company that deals in it and ask for the specifics.)*Pipe flanges that are made to standards called out by ASME/ANSI B16.5 or ASME/ANSI B16.47 are typically made from forged materials and have machined surfaces. They are typically in "Pressure Classes" such as 150#, 300#, 600#, 900# 1500#; however, ASME B16.47 still recognizes the 75# or "Class 75" flange for certain low pressure and low temperature applications. These "Pressure Classes" have both pressure and temperature ratings for specific materials. The flange faces are made to standardized dimensions and are typically "flat face" "raised face" "tongue and grove" or "ring joint" styles, although other obscure styles may be permitted. Flange designs are available as "welding neck" "slip-on" "lap joint" "socket weld" "threaded" and also "blind flange". The gasket type and bolt type are generally specified by the standard(s); however, sometimes the standards refer to the ASME Boiler and Pressure Vessel Code (B&PVC) for details ( see ASME Code Section VIII Division 1 - Appendix 2 ). These flanges are recognized by ASME Pipe Codes such as ASME B31.1 Power Piping, and ASME B31.3 Process Piping. Materials for flanges are usually under ASME designation: SA-105 , SA-266 or SA-182.*Please visit following link and download the software, you will get both pressure v/s temperature rating of flange:
What other skills did the wright brothers have?
their other skill possible their best skill was banging each other in the bo ho hard and long
What causes low water pressure in just one set of faucets when all other faucets on the house have good pressure?
You have to undo the aerator at the end of the faucet and clean the screen or plastic water saver out. It will be plugged with sand or sediment.
What would cause a tub faucet to lose water pressure when the other faucets work?
check for leaks
State one condition other than child abuse within the family that may lead to child abuse?
Not flushing the toilet
Is toilet water cleaner than faucet water?
It depends on the way it is set up, normally the water is from the same source, but using water in the toilet for any purpose other that flushing is NOT recommended..
What was the flushing toilet made of?
Most toilets are made of ceramic. Some are a synthetic material, and some have other materials added for looks, such as wood or metal.
Can a toilet spin water down going anticlockwise?
It depends on the flushing system you have. Here there are 2 toilets, one spins clockwise, the other one counterclockwise.
Who made the first flush toilet?
The Minoans invented the first flushing toilets among many other things. Information about the first modern-day flushing toilets: The first patent for a flushing toilet was issued to Alexander Cummings in 1775, sixty years before Thomas Crapper was born. Crapper was awarded 9 patents during his lifetime, 3 of them for improvements to the flushing water closet, but the true inventor was Alexander Cummings. Also, Sir John Harrington had invented a water closet in 1596 with a proper flush, but no water trap.
Why flushing toilet made of ceramics?
non phorporus, sobowel movementsand other items wont stick. Now when a toilet backs up, its not because thedodo is sticking to the integral trap, its because there is too much of it or there's a restriction of flow down stream
If we closed off water to repair running toilet and temperatures outside dropped and now water will not flow and fill toilet tank are the pipes frozen?
If it is just the toilet that doesn't have water, then the pipes are probably not frozen. If it is the whole house than maybe yes. If you have water at other faucets, look at the toilet and see where the blockage is. Disconnect the supply line under the tank and see if water is coming through the shut off at the toilet if there is one.
What would the pressure in your kitchen faucet be low if all other sinks in the house are fine?
Most of the newer kitchen faucets have "flow restrictors" to limit water use.
Where did Alexander cumming invent the flush toilet?
He was awarded the first patent for the flushing toilet (or valve closet) in 1775. This new toilet was an improvement of Sir John Harrington's water closet, which was invented in 1596 and used by Queen Elizabeth I. The water closet was able to flush, but did not have a water trap. Cummings' toilet allowed some water to stay in the bowl after flushing because of the "S trap," a sliding valve between the bowl and trap. This excess water kept the house from smelling like sewage and helped to clean the bowl after use. Many other inventors followed Cummings and contributed their ideas to what is now the modern day toilet.
What causes high water pressure in the first faucet on the water line from where it enters the house. The cold water is under high pressure but other faucets in house are fine.?
Possibly a pressure reducing valve installed after piping for first faucet, which would cause situation describing.
