0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the correct side to use aluminum foil?
On Reynolds aluminum company website you'll find :Which side of Reynolds Wrap® Aluminum Foil should I use, the shiny or the dull side?Actually, it makes no difference which side of the aluminum foil you useboth sides do the same fine job of cooking, freezing and storing food. The difference in appearance between dull and shiny is due to the foil manufacturing process. In the final rolling step, two layers of foil are passed through the rolling mill at the same time. The side coming in contact with the mill's highly polished steel rollers becomes shiny. The other side, not coming in contact with the heavy rollers, comes out with a dull or matte finish.
What types of luster's are shiny but not metallic?
lusters are shiny because of the chemical in side it
Why is aluminum foil shiny on one side but not the other?
because as the foil goes through rollers when it is made the side that is against the rollers gets shiny and the side that's against the other foil becomes matte
What is the difference between pigment printing and reactive printing?
In the technique of Pigment printing all the pigments are applied on the surface of the fabric usually, so there effects are mostly one sided, the other side used to have the shadow or the impression of the print. In pigment printing only one side is fully printed the other side just may have a little impression but not have the same printing design. In reactive printing method fabric has the same printing on the both sides as the dye particles in the print paste make a bond with the fiber. This method is best fit when we need same printing on both sides of the fabric.
When smoking pills on aluminum foil which side goes down?
Shiny
What side of foil is supposed to have food on the shiny side or dull side?
the right side
Bar-b-que on what side of aluminum foil?
If you are baking something wrapped in foil, you should probably have the dull side of the foil out. The dull side reflects heat a bit less than the shiny side. This means that cooking with the shiny side out would make your food cook more slowly.
Is the shiny side of the aluminum foil safer to touch the food when heating or the dull side?
It is a result of the rolling process, manufacturers roll a large ingot of aluminum through successivly smaller thickness of roller so the ingot gets thinner and thiner, however for the very last roll the aluminum is to thin to be rolled alone, so they put through two sheets, the sides which face each other become dull.
Which side is inside if you are baking fish in tin foil?
The "inside" of tin foil is the dull side. The "outside" of tin foil is the shiny side.
Which way do you use tin foil shiny side up or dull side up?
Shiny side up. The reflective surface is designed that way to deflect radiation better. But, babies won't die if you do it the other way around.AnswerTake it from the people at Reynolds. They make the stuff. They will tell you that it makes no difference which side is in or out. Optical light scatters differently from the dull side than from the shiny side, which is more like a mirror. But both sides absorb or reflect light (and infrared radiation) equally. AnswerScientifically speaking, the shiny side is better top be towards your food when cooking--the reflective surface makes for slightly faster cooking. The dull side should be towards the food when freezing--the shiny side outwards will keep any heat that would enter at bay better.These make very small differences, however, and your food will probably come out APPROXIMATELY the same either way.
The shiny side of aluminum foil is placed towards your food to prevent heat loss due to?
There is no discernible heat retention difference between the shiny or the dull side of aluminum foil. The shiny side is shiny because of the way foil is made. During the last pass through the rolling mill, a double thickness of foil is run between the rollers. The side of each sheet that comes in contact with the polished steel rollers comes out shiny. The other side has a matte finish.
What is the correct side to use aluminum foil?
On Reynolds aluminum company website you'll find :Which side of Reynolds Wrap® Aluminum Foil should I use, the shiny or the dull side?Actually, it makes no difference which side of the aluminum foil you useboth sides do the same fine job of cooking, freezing and storing food. The difference in appearance between dull and shiny is due to the foil manufacturing process. In the final rolling step, two layers of foil are passed through the rolling mill at the same time. The side coming in contact with the mill's highly polished steel rollers becomes shiny. The other side, not coming in contact with the heavy rollers, comes out with a dull or matte finish.
What are the good side of hashish?
The good side of hashish is the shiny side. When you get a 1 kilo block, there will be a shiny side and a rough side. Always begin smoking the stuff from the shiny side as it is much stronger.
Can you use an action replay to catch shinnies in Pokemon Pearl put them in Pokemon Ranch turn off the shiny code on pearl the put the shiny Pokemon from Ranch into Pearl and have it stay shiny?
Yeah, you can.First, get some pictures of your legs. Shins, especially. Then upload the pictures to a DSi or 3DS with one of those cards that goes in the side. After you've done that, you can import the pictures to Pokémon Ranch.Voila; shinnies.Now, if you want shinies, however...
Is the shiny side of the DVD the content side?
Generally speaking, the shiny side of a DVD (or CD) is, indeed, the content side, so yes, this is true. It is possible to put a finish on the "label" side of a DVD or CD that is more shiny than the "content" side, but we often see a "dull" finish to the non-content side of one of these discs. If you look at the content side of the media in light, you should see a bit of a "rainbow" effect as light is reflected off the reflective surface beneath the clear material the disc is made of. This is the content side of the disc, and the laser used to scan it will "bounce" off the reflective surface.
Is the shiny side of aluminum foil suppose to be on the outside of wrap for heat?
Technically, there is no inside or outside to foil, but, one would suppose that the shiny side of the foil would actually be the INSIDE, because the shiny side would reflect the heat waves, such as a mirror reflects light better on a shiny surface.I use the shiny side to cover pie crusts when I don't want them to burn because it reflects the heat away from the covered area. When I'm roasting or baking I put the dull side out because it helps the food absorb more heat and cook quicker-but only a little bit. another questin you should think about is what makes aluminum foilAnother point of viewThe folks at Alcoa (the Aluminum Company of America) will tell you that it doesn't make a difference which side is in or out when using foil - unless you are interested in looking at yourself in it. Infrared radiation - heat! - works equally the same with either side. (You can't see infrared directly.) Oh, and the "amount" of visible light (light above infrared) that is reflected by both sides is almost identical, too. It's just that the "dull" side scatters it more than the "shiny" side, which has a smoother surface and acts more like a mirror. If you have a preference, by all means continue. But not because physics dictates it. It does not.
Why is one side of Reynolds wrap shiny?
the manufacturing process uses large metal rollers. the side next to the rollers is shiny.
