Want this question answered?
Look behind the battery cover for a drain tube connected to a nub on the frame.......drain the oil and change the filter (pre-loaded with fresh oil) and you are done.....there is no drain plug persay.....hope this helps you out......Murph
In order to change the motor oil on a Honda XRM 125 you need to lift the bike on a motorcycle rack. You then need to unscrew the drain plug, let the oil drain out, put the drain plug back in, change the oil and put new oil in.
No you do not.
There is a panel on the bottom of the sled. Unscrew the 5 screws with a allen bit. drain the oil from the plug that is there. You also have to take the right panel off the front of the sled and drain the oil out of the oil resevior. To change the oil filter, you have to remove the airbox, then the battery, then the battery frame. The oil filter is under all that. Hope this helps.
If you can't find the oil drain plug you need to go to tire pro and let them change your oil.................
No you don't have to drain the oil to change the stator.
Drain then change the filter.
if you need to ask then you need to take it somewhere and have someone else do it....but you need to jack it up unscrew the drain bolt on the oil pan drain the oil into a container and then remove the oil filter and replace it
Drain pan, socket to fit the drain plug, new filter, correct weight oil, rags. You may need a floor jack and jack stands to change the oil in a car you must jack up to get under.
Remove drain plug. Drain oil. Change oil filter element. Replace drain plug. Refill with fresh oil.
The Oil Drain Hose is located on the leftside under the battery and is clamped to a blind (goes no where nipple) fitting. If you want to drain and change your primary then it is on the leftside under the derby cover.
To change the oil in a Chevrolet S10, you need to unscrew the old oil filter, drain the oil, screw the new oil filter in and replace drain plug, then add new oil. Please dispose if old oil and filters appropriately.