I don't know for this specific car, but as in most cases the engine or gearbox/transfer case has to come out. If you have access to a lift its easier to remove the gearbox and transfercase as a unit. The clutch lies just rear of the engine.
I need an answer to this too.
get a mecanic to do the job
replace the whole thing. you can do a new one or get one from a junk yard
The Clutch slave cylinder is located on the passenger side of the bellhousing.I recommend to replace the Clutch Master cylinder also;if either one is replaced , the other will fail in no time.
To replace the clutch you must separate the engine and transmission. For a front wheel drive vehicle, separating the engine and transmission can only be accomplished by removing the engine.
Torque Converter Clutch
you first have to drop the transmition. there is one bolt on the transmission support and 4 on the engine . after that you will have to separate the pressure plate from the flywheel and then change the clutch
Replace clutch cable on sportsbike
You have a hydraulic clutch, most if not all of this type do not have an adjustment. Most likely suspect is the slave cylindar on the transmission. That or the master cylindar, but the slave is more likely. Put a repair kit in or replace slave cylindar. Neither is very costly.
what is cost to replace a clutch in a BMW Z3
no
its one of the solenoid on the vavle bondy inside the transmission