When you are sitting with your foot on the brake and the engine running and you select drive, depending on the quality of your vehicle, there might be a slight jolt or thump as the engine is then suddenly trying to move the car along the ground. So if the tick-over
speed is too low the sudden extra effort could slow it down further and make it run less smoothly. When the selector is moved from park to drive, there are no gears engaging, only a clutch and or brake band to start engaging, this should happen fairly smoothly with no mechanical noise apart from that already mentioned.
You have a burnt valve:( Do compression check to sure. Should be with in 10% of the highest reading.
If your milk is "slightly solid" it is spoiled.
Very good. it has DuPont which gives the inside of the engine silicon coating that smooth-ens the sleeves. so smooth run better performance and quieter engine.
because you broke it!!
Only where it is used in place of the actual adverb form, which is smoothly.E.g. The car engine runs very smooth now.Otherwise it is a verb (to make smooth) or an adjective.
You will have a smooth running engine when the rotating assembly is balanced.
first you should help your self get smooth then you should think of getting a cheese getting smooth
Why not look for guys who like hairy guys. Why worry about others expectations? As for how a man is supposed to look, in your case, he is supposed to be hairy. Personal preference, I prefer hair to smooth. To my eye, it is more masculine.
Synthetic 5W - 40 , Tested and engine is smooth and best
by sensing engine RPM it can teel if engine is not running smooth by sensing the rotation of the rpm's of the engine.
The rotors should be smooth, no grooves where the pads touch.The rotors should be smooth, no grooves where the pads touch.
The belt has two sides. The smooth side goes against the smooth pulleys while the ribbed side goes against the grooved pulleys. There should also be a sticker somewhere under the hood in the engine compartment. If not then look at the belt routing before you get in and start taking things apart.