It's on the exhaust system just behind the engine. The easiest way to get to it is to go from underneath the car.
It is screwed into the exhaust manifold on the rear of the engine.
This car only uses the sensor in the distributor.
That car does not use a maf sensor.
ON my 92 sundance the sensor is located on the side of the themostat housing. It also controls the cooling fan. If it quits, start the car let it warm up and unplug the sensor at the housing. If the fan comes on the sensor is bad.
A 1994 Plymouth Sundance/Duster does not use a speedometer cable. Instead, it uses a Speed Sensor located on the transmission.
the oxygen sensor in located in the exhaust manifold under the intake manifold at the back of the engine
Code 11 means no camshaft position sensor signal detected during engine crankingFix : Replace the camshaft sensor
Code 11 means no camshaft position sensor signal detected during engine cranking. Fix : Replace the Camshaft sensor
It is in the exhaust manifold next to the firewall.
It is screwed into the exhaust behind the engine.
It is in the exhaust manifold on the back of the engine.
one before the cat and one after