some times it can be found on gem module but most of the time take it to dealer and let them retrive the information from the vehicle computer if you can not find the orignal code card with the owners manual the shop should not charge you more than a half hour of labor for retriving the info for you.
This is the FREE!
http://www.YouTube.com/watch?v=5cadt0N4M5g&feature=youtu.be
the manufacturer or dealership
the 5 digit factory code should be on the computer module.on the 2011 F-150 look on the passenger side and find the fuse panel and you will see a white sticker with 5 digits and thats your code to keyless door lock pad
Follow this link - http://underground-secret.com/ford_keyless_entry_code.html
if you are talking about the keypad entry module it is behind the rear seat on the drivers side pull the backrest off the seat then pull away the carpet its right there (the code is also on the module) if you are talking about the keypad entry module it is behind the rear seat on the drivers side pull the backrest off the seat then pull away the carpet its right there (the code is also on the module)
i was at the ford dealer .. and i was told the code is on the vehicle ..u just have to find it om the control module for the keyless entry under the dash or on the body map sensor . which the guy at the deck could mot tell me where they where
how do i program it
You can't! The one they give you is permanant! Rock 2009 F-150 FX4
Door Code Location...I actually found the door code behind the fuse box area (Driver Side) on my brother's 2000 Ford Expedition EB. There is a big white sticker with 5 numbers starting with number 1####. Hope this helps...Or check related link below...
If you see on the drivers side door some kind of key pad with numbers then you have keyless entry. It's unlikely to have it.
KEYLESS ENTRY SYSTEMWith the keyless entry keypad, you can:• lock or unlock the vehicle doorswithout using the key.Your vehicle has a factory set 5 digitcode that operates the keyless entrysystem. You can also program yourown 5 digit personal entry code. The factory-set code is located:• on the owner's wallet card in the glove compartment• or at your dealer.When pressing the controls on the keyless entry keypad, press themiddle of the controls to ensure a good activation.This system will disable the power door lock controls. These will notwork until the vehicle is disarmed.Programming your own personal entry codeTo program your own code:5. Enter factory set code (keypad will illuminate when pressed).6. Press 1/2 control within five seconds of step 1.7. Enter your personal 5 digit code.Enter each digit within five secondsof previous one.8. After the code is entered, thelocks will cycle, confirming that thenew code has been set.Do not set a code that includes five of the same number or presentsthem in sequential order. Thieves can easily figure out these types ofcodes.Your personal code does not replace the permanent code that thedealership gave you. You can use either code to unlock your vehicle. If asecond personal code is entered, the module will erase the first personalcode in favor of the new code.Locks and Security149Locks and SecurityIf you wish to erase your personal code, use the following instructions:1. Enter factory set code.2. Press 1/2 control and release.The system will now only respondto the factory set code.Anti-scan featureThe anti-scan feature preventsrepeated attempts at arriving at a valid key code.The keyless entry pad is disabled for 1 minute after 7 unsuccessfulattempts (35 consecutive button presses) at entering a valid key code.The keypad will flash during this 1 minute mode. However, the 7/8 and9/0 controls will still lock the vehicle.Anti-scan will be turned off after:• one minute of keypad inactivity.• the remote entry transmitter UNLOCK button is pressed.• the ignition is turned to the ON position.Unlocking the doors with the keyless entry systemTo unlock the driver door, enter either the factory set code or thepersonal code (each digit must be pressed within five seconds of theprior digit). The interior lamps will also illuminate.To unlock all doors, enter the factory set code or personal code (driverdoor unlocks) and press the 3/4 control within five seconds.Locking the doors with thekeyless entry systemIt is not necessary to enter thefactory or personal code prior tolocking all doors. To lock the doors:• with the driver's door closed, press the 7/8 control and the 9/0 controlat the same time.Locks and Security150
KEYLESS ENTRY SYSTEM With the keyless entry keypad, you can: • lock or unlock the vehicle doors without using the key. Your vehicle has a factory set 5 digit code that operates the keyless entry system. You can also program your own 5 digit personal entry code. The factory-set code is located: • on the owner's wallet card in the glove compartment • or at your dealer. When pressing the controls on the keyless entry keypad, press the middle of the controls to ensure a good activation. This system will disable the power door lock controls. These will not work until the vehicle is disarmed. Programming your own personal entry code To program your own code: 5. Enter factory set code (keypad will illuminate when pressed). 6. Press 1/2 control within five seconds of step 1. 7. Enter your personal 5 digit code. Enter each digit within five seconds of previous one. 8. After the code is entered, the locks will cycle, confirming that the new code has been set. Do not set a code that includes five of the same number or presents them in sequential order. Thieves can easily figure out these types of codes. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your vehicle. If a second personal code is entered, the module will erase the first personal code in favor of the new code. Locks and Security 149 Locks and Security If you wish to erase your personal code, use the following instructions: 1. Enter factory set code. 2. Press 1/2 control and release. The system will now only respond to the factory set code. Anti-scan featureThe anti-scan feature prevents repeated attempts at arriving at a valid key code. The keyless entry pad is disabled for 1 minute after 7 unsuccessful attempts (35 consecutive button presses) at entering a valid key code. The keypad will flash during this 1 minute mode. However, the 7/8 and 9/0 controls will still lock the vehicle. Anti-scan will be turned off after: • one minute of keypad inactivity. • the remote entry transmitter UNLOCK button is pressed. • the ignition is turned to the ON position. Unlocking the doors with the keyless entry system To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will also illuminate. To unlock all doors, enter the factory set code or personal code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all doors. To lock the doors: • with the driver's door closed, press the 7/8 control and the 9/0 control at the same time. Locks and Security 150
you can purchase new keys thru ford if you supply your VIN ,