Where are the drain holes underneath an 87 Mazda B2000 cab-plus pickup?
There are none...i have an 87, short cab and there are no drain holes.
I changed my starter motor on my 1984 B2000 Pickup. Has to be done from underneath. Raise the front end - use jackstands. Remove the negative battery terminal. The holding bolts on the starter are difficult to reach and slow to remove but,with patience, can be done. Space around the motor is tight but with persistance, you can snake it out. Good Luck.
Hello, I found the info you want but it is impossible for me to explain because I am learning about these trucks myself. I bought a 1984 B2000 workshop manual from Mazda for around $17.00 and it has full instruction for everything for your truck including a full teardown. The information you want on Chapter 5: page 10 It has full pictures and exploded view of starting motor and solenoid. I wish I could be…
Most import 6 lug patterns will fit, this includes Mitsubishi, Isuzu, Toyota, etc... It is very common to find rims from a Pathfinder on a B2000 or B2200. Some GMC rims are also common. Toyota has a lot of pickup trucks including much newer models that have some beautiful rims that bolt right on. Kyrasis6 Owner of Mazdatruckin.com
Mazda B2000 1987 will not start Fuel ok.. no spark.Has 12v to coil..no coil spark out of secondary to distributor.changed coil... same thing. What should I check next?
I have a Mazda B2000, 1986. Two items, the "ignitor" and the "pickup coil" inside the distributor are the next items to check. Ignitor is more likely to go bad. It can be checked at Autozone for free, maybe other stores as well. pickup coil can be checked with ohm meter. If not shorted or open, it should be OK. I have fixed this before, but now I have it again and I checked all…