as long as it is the factory radio, go to your nearest Mazda dealer and they should be able to get the code using your VIN number.
good luck
Ber
Each radio has it's own code, and no 2 are the same. You will have to cantact your Saturn dealer.
If you have already tried to enter a code many times, and it doesn't work, do the following: 1. Disconnect the battery, 2. Connect the battery, 3. Put Radio ON 4. Enter the radio code of 4 digits, 5. That's all. If you don't have the radio code of your Honda Odyssey, have on hand its VIN, and ask your former salesperson or your former dealer.
First clear all codes. remove the neg. battery cable for 10 sec. then turn the radio on it will display CODE. Enter the 5 digit numbers using the preset buttons numbered 1 to 6. Yes above answer is right but don't forget you need to take out your radio and get the serial number off it and call your local Honda dealer to get the code to reset it.
How to get the 1995 c 220 Mercedes radio code? i just open the Battery and my radio code reset, i don't know the code
Assuming you have the 4 digit unlock code for your radio: 1. Hold AS button down and turn radio on - keep button held down. 2. You will be prompted to enter the code so let go of AS button: 3. Use the '1' button to select the first digit, the '2' button for the second etc... 4. When you have used buttons 1 - 4 to enter the correct code, press the AS button again for the last time - bingo! unlocked!
Each radio has it's own code, and no 2 are the same. You will have to cantact your Saturn dealer.
Try this below. I have the code to unlock Mazda radios the have 'ERR' due to 3 wrong codes. Do not listen to mazda book that states 3 wrong codes make CD playing Inop req replacement... 121 Metro DW10*2 > 203028, MX5 NB30P2, Milennia,323 BJ10*2, 626 GF10S2, Tribute. Step one:- press one at a time- preset 6, AM, Auto M, Seek ^ (up). Step Two:-Input this number, 4989. Step Three:- Press and hold Auto M and Preset 6 together. Step Four:- The Word 'GOOD' will appear on the screen indicated that the radio will work. Step Five:- Reprogram new Antitheft code into radio as per instrution manual. Hope this helps some people out, save you some money as so.
you can cut wire of battery for 2 hours. then you fix it and enter your correct code.
Obtain the unlock code that was shipped with the vehicle. If you don't have the unlock code, your local dealership can pull the radio and look up the code with the serial number. Once you have the unlock code, then turn on the radio. You should see SAFE displayed. After about 3 secs, "0001" should appear. Use the station preset buttons 1 thru 4. Preset 1 changes the first digit of the code, and preset 2 changes the second digit, etc. Enter all 4 digits of the code. After code is entered, press right side of "Seek" button for about 2 seconds, until an audible signal is heard. If you hose up and get the wrong code...will go back to SAFE displayed. You will get another chance to enter the code. After 2 failed attempts, you have to wait 1 hour again for it to unlock. So carefully enter the correct code the first time.
The unlock code for Malum in BIONICLE Glatorian Arena 2 is M41UMZ
Who is code to unlock Shrek 2:Oger Bowler
remove the radio, and get the serial number. then go to the nearest dealership and they will give you the code to unlock the radio. i would also recomend writing it down and keeping it in the car, as i am sure you will experience this problem again
If you have already tried to enter a code many times, and it doesn't work, do the following: 1. Disconnect the battery, 2. Connect the battery, 3. Put Radio ON 4. Enter the radio code of 4 digits, 5. That's all. If you don't have the radio code of your Honda Odyssey, have on hand its VIN, and ask your former salesperson or your former dealer.
What is the unlock code for midnightpool 2 Samsung C 5212
Probably depends on the year/model of the VW. For a 1999 thru 2002 Jetta, you would need to do this. Obtain the unlock code that was shipped with the vehicle. If you don't have the unlock code, your local dealership can pull the radio and look up the code with the serial number. Once you have the unlock code, then turn on the radio. You should see SAFE displayed. After about 3 secs, "0001" should appear. Use the station preset buttons 1 thru 4. Preset 1 changes the first digit of the code, and preset 2 changes the second digit, etc. Enter all 4 digits of the code. After code is entered, press right side of "Seek" button for about 2 seconds, until an audible signal is heard. If you hose up and get the wrong code...will go back to SAFE displayed. You will get another chance to enter the code. After 2 failed attempts, you have to wait 1 hour again for it to unlock. So carefully enter the correct code the first time. For a 1993 Fox: Turn on the radio. You should see SAFE displayed. Hold MODE and SCAN. After about 3 secs, "0001" should appear. Use the station preset buttons 1 thru 4 to enter your unlock code. Preset 1 changes the first digit of the code, and preset 2 changes the second digit, etc. Enter all 4 digits of the code. After code is entered, hold MODE and SCAN for about 2 seconds, until an audible signal is heard.
nanny mania 2
First clear all codes. remove the neg. battery cable for 10 sec. then turn the radio on it will display CODE. Enter the 5 digit numbers using the preset buttons numbered 1 to 6. Yes above answer is right but don't forget you need to take out your radio and get the serial number off it and call your local Honda dealer to get the code to reset it.