In the cylinder heads. The larger valves are the intakes. You'll notice that the passageway leads to the exhaust ports where the manifolds or headers attach.
yes there are 8 intake valves and 8 exhaust valves in the set of heads
The intake valves line up with the intake runners on the intake manifold. The exhaust valves line up with the exhaust runners on the exhaust manifold or headers. With #1 at tdc you can set 1,2,5,7 intake and 1,3,4,8 exhaust valves. Rotate the engine one revolution to #6 tdc and set the remaining valves.
Intake valves are larger than exhaust valves, and are aligned with the intake runners on the intake manifold.
1973 350 Corvette. 76cc chambers. 2.02`` intake valves 1.6`` exhaust valves.
this is a mechanics job you have to remove inlet manifold,exhaust manifolds,and then remove heads to replace the valves
the bigger valve is always the intake valve on any car......you have a 350 so its a v8 so you have 8 intake valves and 8 exhaust valves ..........
305s had 1.72" intakes with 1.50" exhaust valves. Depending on the 350, it could be the same, or have either 1.94" intake and 1.50" exhaust, or 2.02" intake with 1.60" exhaust.
Exhaust valves are always smaller.
Probably 1.72 intake and 1.50 exhaust, but also could be 1.94 intake and 1.50 exhaust.
You need to get a Casting # book and look up which heads you have.
The exhaust valves are smaller and lead to the exhaust manifold.
Yes the intake and exhaust valves have to be close.