Motorcraft is best for Ford
on the rear diff
Try replacing the injectors.
350% of 96 = 336
350% of 96 = 336
It not very hard at all. I just replaced mine in my 96 350. First you need to remove the valve covors (all metric) and then you will see all the valves and the top electrical part of the injectors. be careful when removing not to damage the gaskets b/c they are REUSEABLE, be carefull what you use to clean them with. you should have 2 electrical ports per gasket which go to the glow plugs and your injectors. next remove a black plug that has 1 wire going to it and under that will be the glow plug. just be easy loosening the glow plug not to twist it off, if you twist it off your screwed. I highly advise you to buy all of your parts from an international navistar dealer insted of ford. also if you have to replace one you might as well replace them all so your not doing it agin for a while. Jared
only 96 and newer have OBD ports
The 1996 Ford Ranger 2.3 L engine has Fords Twin Plug ignition system , so it has ( 8 spark plugs )
How do you install spark plugs on a 96 nissan maxima?
On a 1996 Ford Crown Victoria , which has the 4.6 liter Single Over Head Cam V8 engine from the factory ( there are 8 spark plugs )
( 6 ) for the 4.0 liter V6 engine and ( 8 ) for the 5.0 liter V8 engine
27.43%