On the transaxle(transmission) bell housing, on the driver's side. there should be a little window cut out on the top there are some notches there. That's the timing marks.
If you have a 6 cylinder 3.0L the timing marks are located on the crankshaft gear for the timing belt (its just a notch on the rear of the gear just spin it clockwise until you find it) that lines up with a notch that sicks out from the block just above it. The camshaft marks are little arrows on the camshaft gears which line up with little marks on the cover plates that close the back of the gears in (about 1 o'clock)
What are the timing marks for a 1997 Nissan Altima gxe 2.4 cylinder
The timing marks can be found on the front main pulley and the flywheel. The timing marks indicate when a certain piston is at the top of its stroke.
i need timing marks mitshubisi truck 2.4 l
tdc 12 degrees
1972 Plymouth duster strait 6 firing order
if you are referring to replacing the timing belts, there are settings tha must be set correctly as you are installing the belts.there are marks on the timing pulleys that must be set correctly or the cam and crank will not be timed correctly,and no matter what you do to timing after that it will never be right,unless thses are lined up correctly to start with
How to time a 6 cylinder motor
The 1995 Toyota Camry four cylinder engine timing marks can be found on the main pulley. The timing marks will be scattered around the outside of the pulley.
how do you adjust the timing on a 2002 kia sportege it is adjusted by the computer. All you can do is make sure the timing marks are on there marks when cylinder one is at TDC.
as you face the engine look on the right side of the trans. housing, there should be a pc. of black foam rubber stuffed into a slot pull that out and you will see the timing scale.
The timing marks are on the crank pulley and oil pan. You have to line them up and also line your cams up.