0
What else can I help you with?
Are there different types of hdmi?
There are six different types of hdmi cables. There are audio/video, connectors, extenders, They set up computers to television sets, Satellite boxes, wii's and other game consules.
How can you connect 3 phono cables into one set of phono sockets?
There is some information missing in the question, so the answer will need to make some assumptions. "Three cables" is probably referring to three pairs of audio cables or three sets of video and audio. Each of the cables will have a red connector, a black or white connector and a yellow one if they carry video. The set of phono sockets is probably referring to two or three sockets that one cable can plug into. To connect three different sources into one input, a switcher is needed. This can be a simple unit costing only a few dollars or pounds but it might be a more sohisticated audio and video theater amplifier. Whichever one is chosen, it will allow one of the three signals to be selected. To connect a single output to multiple inputs, the audio signals can be taken to simple phono splitters and on to the three inputs. If a video signal is being used, that will require avideo distribution amplifier. Most electronic stores will be able to supply one. Radio Shack in the US and Maplin in the UK will have them along with many other stores.
How does S video cable compare to HDMI?
High Definition Multimedia Interface (HDMI) cables are generally used for connecting computer based devices to your television. S video cables are used to connect traditional DVD players, video recorders to television sets.
How easy is it to connect a DVD/VCR to a tv?
Gather two sets of combination stereo audio and composite video cables. These bundled cables have a left and right audio cables as well as a composite video cable.,Turn off the DVD, VCR and television,Plug one bundled cable into the appropriate output jacks on the DVD player. Connect the other end of this cable to the appropriate input jacks on the TV. This lets you watch DVDs on the TV.,Plug the other bundled cable into the appropriate auxiliary output jacks on your DVD player. Connect the other end of this cable to the appropriate auxiliary input jacks on the VCR. This will allow you to send a signal to the VCR,Turn everything back on and make sure that you can watch DVDs and record from DVD to VCR.
What are the quality advantages of 3gp videos?
The Third Generation Partnership Program is responsible for the definition of 3gp, which is a current standard video and multimedia format for portable devices like cell phones. The primary benefit of 3p is that it allows multiple types of playback (audio, video, and from different file sets) to be utilized within a single interface. 3gp video itself uses MPEG-4, which is an advanced and efficient form of digital storage.
What kind of TV has only a cable jack in the back?
Many earlier "Cable Ready" TVs are that way. Only the newer and more expensive sets had the 3 line audio/ video connectors
Can you use a RCA cable for HDTV technology?
The answer is YES, you can substitute Composite Video Cables with RCA cables for use in HDTV Technology.-I tried it, using 3 sets of audio RCA cables (red and white)One for the Audio connections (red and white) and the other two for composite video connections. (red, blue, and green)-The following address shows the process and results, using a HD digital tuner with 1080i output on a HD ready TV.http://s869.photobucket.com/albums/ab252/tompetter/?action=view¤t=RCA.jpgMost modern televisions will offer you a series of connectivity options:1) 75ohm standard antenna input2) composite video - RCA jacks (yellow, red, white)3) component video - RCA jacks (red, green, blue)4) S-video - DIN connector5) DVI6) HDMIThe best connection is HDMI. The worst is 75 ohm coaxial cable. Numbers 1 and 2 on this list are not capable of passing HDTV at all.For further assistance see the Consumer Electronics of Association Connection Guide:http://www.ceaconnectionsguide.com
How Audio/Video Cables and Adapters Keep the World Moving?
In the early days of media and television, connections were simple. Essentially, televisions existed with a plug that connected to a wall outlet to receive power, and an internal connection that hooked up to a set of antenna that were used to receive signal. As media technology progressed, we began to see more connections on television sets that included connections for coaxial cables, which connected to cable providers, as well as satellite receivers. Today, we find televisions that have connections for digital signal providers, as well as HDMI connections for high definition sources, RC connections for various audio hardware, and even USB and Firewire connections that televisions can use to connect to computers in order to stream information and data. Various adapters have also been employed in the realm of media technology, as there are so many choices to be had. As technology has grown by leaps and bounds over the past two decades, it has been important for media hardware providers to come up with solutions for older models. Adapters have been produced that can turn an older television or stereo into a modern one. While connections like S-Video have been phased out, media technology providers have recognized that not everyone has been able to upgrade to the latest in technology. Therefore, companies have begun producing adapters that fit all manner of video and audio inputs and outputs in an effort to keep existing hardware functional. Beyond that, it is important to realize the value of audio and video cables. They allow us to hold rock concerts, design home theater systems, and help us to simply deliver audio and video from one room of the house to another. Without audio and video cables, we would still be in the early days of entertainment, where everyone gathered around a singular black and white television.
You can get video when you plug your aspire one to your tv how do you get audio?
You can either hook up a stereo system (providing Line-In RCAs), or the TV, directly to your computer's sound card output. Video connectors such as VGA, DVI and others (except RF and HDMI) carry only video signals, so audio must be connected separately. Most LCD television sets sport 2x RCA audio-in connectors - connect your sound card's output there, using a stereo-mini-jack-to-2xRCA cable.
How do you hook up a DVD player to an older tv?
Easiest/fastest way. Run the sattelite coaxial cable to the "sattelite in" jack on the back of the sattelite receiver, run a coaxial cable from the "out to TV" jack of the sattelite receiver to the "antenna in" jack on the VCR and a coaxial cable from the "out to TV" jack of the VCR to the "antenna in" coaxial of the TV. Then, run audio/video cables (red, white and yellow) from the "video out" (yellow) of the DVD player to the "video in" of the TV and the red and white cables out of the DVD to the red and white jacks of the TV. Audio out (left and right) of the DVD to audio in of the TV. If the TV has 4 in/out jacks to accept component (red, white yellow) cables, run the component cables from the out side of the sattelite box, VCR, DVD and video game seperately to the TV inputs, 1,2,3 and 4. You would then simply use the TV remote to change inputs to switch from component to component. The only coaxial would be the sattelite signal from the dish to the sattelite receiver.
Household items such as television sets and audio equipment are know as?
Brown Goods
What sets up a government?
Multiple branches
