Want this question answered?
No
No, you need a 36 volt charger.
No
No, you need a 24 volt charger.
No it cannot.
The formula you are looking for is I = W/E. Amps = Watts/Volts. 300/24 = 12.5 amps. A good charger with an output of 15 amps will do the job nicely. The time that it will take to charge the battery will depend on the amp/hrs of the connected battery and the state of discharge that the battery is in when charging starts.
Yes, an 18 volt charger can damage a 14 volt battery. This is because the wattage for the battery needs to be equal to the wattage of the charger.
I can if I charge 2 of them at a time. Most 24 volt chargers also have a 12 volt setting. What is hard to find is a 32 volt charger. We can charge a 12V battery with 24V charger, by connecting two 12V batteries in series i. e. the negative terminal of the first battery is connected to the positive terminal of the second, now the charger positive terminal is connected to the first battery positive terminal and the negative terminal of the charger is connected to the negative terminal of the second battery.
I dont have a clue but, I have a massey ferguson 298 1983 tractor that has a 24v starting system. I have resorted to disconnecting the terminals from one battery and then placing both batteries , one at a time on a trickle charger. Once you disconnect the terminals from one battery you can leave the other battery connected charge both then reconnect.
A 24v drill is generally used for light domestic or D.I.Y. jobs around the home. When working with concrete, reinforced concrete, or stone, a higher voltage drill may be required.
it should work as long as the batteries are connected in series + to - what you would need to check is if the charger for the cart charges 24v or 8v if it is 8v you would need to get a 24v charger for it it would be possible to charge the batteries with a 12v charger but it would need to be hooked to each battery separately
same as any single 24v battery. Positive first then negative to frame just to be safe.