The clips underneeth the cushion are made in kind of a wierd "C" shape. When you pull up on the seat cushion the clips stay with the floor bracket. Sqeeze the clip together so to remove them from the floor. Look at the bottom of the cushion now. It is made with a "U" shape, with a "STRAIT" wire above and behind it. Now coming from the rear of the cushion with the clip, insert the "U" on the cushion into the middle of the "C" on the clip and then the top of the "C" onto the "STRAIT" wire that is on the cushion. Then get the seatbelts in place with the cushion inserted all the way and with the clips inline with the floorboard holes, and push down on the cushion above the clips.
How do you remove and replace wiper switch on 2002 Chevy Cavalier
How do you replace a turn signal bulb in a 1998 cavalier
To replace the thermostat on a 2002 Cavalier 22 Ecotec, drain the radiator and remove the upper hose assembly. Replace the thermostat and refill the radiator.
You can replace the dome light bulb in a 2002 Chevy Cavalier by first prying the dome light cover off of the light. Then, remove the bulb and replace it by twisting the bulb from the socket.
Take it to the dealer.
check or replace thermostat
Take your car to a Chevy Dealer
You have to drop the fuel tank to access the pump.
Remove the tire and wheel from your 2002 Chevrolet Cavalier. Remove the brake pad springs and calipers. Reverse the process to install the new brake pads.
how to replace a tie rod on a 2002 chevy calivier with a 2.2 motor?
two bolts on the top of the plastic housing - lift the plastic headlight out and unscrew the headlight from the bottom of the light- replace the bulb and be sure to get the plastic pins in the right spot before you bolt the headlight back in place.
on the front bottom part of the motor above the starter