you can cover it with a front end car Bra
The PCV valve on a 2002 Pontiac Bonneville is located on the back of the in take manifold, however to get to the PCV valve you will need to remove the valve cover.
if you just need the bumper to be replaced, i would say between a day and 4 days depending on how much money you want to spend. if you order the bumper pre-painted maybe a day or 2 but with it needed to be painted i would say about 3 0r 4 days.
white matter.
To replace a Pontiac Grand Am bumper cover, start by taking out either the three bolts on the side of the fender or in front of the wheels. Remove the top pushpins to remove the cover. Push back the two pins for each headlight, and pull them up. Unplug the lights. Then, get the replacement bumper, and snap it into place like the previous one.
Contact your local used auto parts businesses.
Check under the sound cover on the passenger side behind the glove box.
You will need to remove the front engine cover, on your 1997 Pontiac Bonneville, in order to change the supercharger belt. Loosen the tensioner pulley to remove the belt.
The fuel pump relay in a 1997 Pontiac Bonneville is found under the hood of the car in front of the wiper blades. To access the pump relay, there is a plastic cover with three tabs which must first be removed.
Begin by removing the decorative cover from your 2001 Pontiac Bonneville radio. Remove the radio retaining screws. Slide the radio out and remove the wiring harness and the antenna cable.
take the plastic cover off and you'll fin it under the throttle body
The fuse box for the 1986 Bonneville is under the dashboard. The box has a small cover over it and you'll see it if you look just above the brake pedal and a little to the left.
on a 93 Pontiac Bonneville you would remove the passenger side front tire. there may be a plastic cover that just pulls off. look to your left,back and up a little bit you should see the wires that connect to your cam sensor. theres your cam sensor. 91 Bonneville is probably the same.