Get a manual from the parts store or AUTOBOOKSONLINE.COM.
If you are referring to the front bearings, you have to buy a complete hub assembly.
u first shabbily ding dong yes that is u change it
If the truck is a 4 wheel drive, you can't repack the front wheel bearings. It has a sealed hub/bearing assembly that is not serviceable.
You do not have what is called a gimble bearing on a Volvo 280 drive, they are called gimble bearings on 290 and latter drives. The difference being that gimble bearings both bearings can be removed from the drive side after the upper drive assembly is removed. On a 280 you unfortunatly have what is called intermediate bearings where the aft one comes out the drive side, and the other comes out the engine side. If you have bad bearings, the engine has to be pulled to remove the engine side bearing. To grease the u joints (gimble) you would need to remove the upper drive assembly off the outdrive. unclamp the bellow and remove the upper drive along with the U joints. You can then grease the U joints. There is a zerk fitting on the bell housing that allows you to grease the intermediate bearings, but I was told not to do this as it could blow out the seals and cause more problems than it solves.
You have to pull the bearing assembly out. Be careful and do not let the cap covering the bearings come off.
The 2010 Chevrolet Suburban has rear wheel drive.
The 2004 Chevrolet Suburban has rear wheel drive.
The 2005 Chevrolet Suburban has rear wheel drive.
The 2002 Chevrolet Suburban has rear wheel drive.
The 2014 Chevrolet Suburban has rear wheel drive.
The 2009 Chevrolet Suburban has rear wheel drive.
The 2001 Chevrolet Suburban has rear wheel drive.