Either check with the dealer parts department (might not have it because of the age of it) or check the library for auto repair manuals and see if it is shown in one of them. Library is a great source of info on doing repairs with most of them having repair manuals from various years, makes and models. The cheapest way to get a diagram is to go to the public library and see if they have a manual for your car, many do. If not, I would use alldata.com they are cheap and you can download any information for one car for a year for $25. I had a dealership reject my Caprice for a loose steering coluum and quote me a price of about $700 to fix. Since I knew it wasn't any looser than when I bought the car new, I told them to reject it. I scaped off the rejection sticker and took it to another inspection station and it passed no problem. That was 4 years ago. HI JUST GO TO YOUR LOCAL GM DEALER (I AM A GM PARTS DEALER I HAVE WHAT YOU NEED)SO JUST GO TO ANY PARTS DEALER
under steering column to the left
Under the dash and to the left of the steering column.
It is under the dash to the left of the steering column.
A Caprice steering column can be replaced by another as long as it matches. It if comes from another Caprice of that year, it will fit properly.
left side, under dash left of steering column
ignition switch is located on top of steering column you will need to drop column down to access it
remove the lower shroud on the steering column, and then the 2 bolts that hold the column in place, it should be accessable then.
how do i get the key tu turn in a 1995 caprice classic, if it stuck? It could be the ignition control switch located on top of the steering column which will need to be replaced or the key cylinder itself.
Repairing a steering column in a 95 Caprice depends on what the problem is. Problems with the tilt could require the outer column to be repaired, while a binding steering might need the u joints to be replaced.
In most cases you will need to replace the turn signal switch on the steering wheel for your 1983 Chevy Caprice Classic rather than fixing it. To replace it, remove the horn pad and then use a steering wheel puller and compressor to remove the steering column. You will then remove the signal along with the wiring harness and bus fuses. Replace the signal and wiring and then replace the steering column itself.