Want this question answered?
The Brake Booster is mounted on the firewall and the master cylinder is mounted on the booster. Look at the booster and you will see a very large vacuum line coming from the booster.
If you have a booster you need a vacuum line to perform effectively, disc or drum.
No, the brake booster operates off of vacuum not electricity. If the booster isn't working then check the vacuum line going from the intake manifold to the booster. If the line is ok and not leaking then you need to replace the booster.
If you have a power brake booster then there will be a vaccum line that runs to the brake booster on the firewall from the carburator. Check the booster for holes and broken fittings or buy a new booster. if no brake booster then brakes shouldn't affect vaccum
Yes, it is typically in the fitting on the booster where the vacuum line is attached.
Sounds like your power brake booster diaphragm is busted or there is a leak in the vacuum line going to the brake booster.
hydraulic brake booster (power brakes)
the line is connected to the carburettor if you have one or to the intake manifold after the throttle valve. The purpose is to connect intake vacuum to the booster.
Drivers side, mounted on the firewall, behind the master cylinder. Coming from that booster is a large vacuum line.
The Vacuum line usually connects to the brake booster , or atleast it does in my Ford explorer
If you have power brakes it may be the vacuum booster. The booster may be going bad, the check valve in the vacuum line or a cracked vacuum line.
my 67 was on top