Auto parts store.
I how do you unlock the doorI locked my keys in the car if you have a slim jim where would you put it to open the door
with the key... or a slim Jim Key is not working at the door
To use a Slim Jim on a Grand Am, insert it between the frame of the car and the window. Next, slide it to where the door lock is located.
Don't use a slim Jim...You open a coat hanger and tighten the hook to be a little more closed, then you use wood wedges or a flat tool to pry the door open enough to let the hook through into the car. If you want you can use the slim Jim to help get the hook past the weather stripping, or you can just save the slim Jim to use on a different car that is not slim Jim resistant. Pull to get a broad curve in the wire and use it to pull the door handle open. Not easy takes about 20 minutes of steady effort.
I think you're asking about a tool called a "Slim Jim" its used to open car doors by inserting the Slim Jim down into the door lock assembly via the window and then pulled up unlocking the cars door.
The garage door opener can be programmed into any car. The control works like a TV remote that is universal. The opener just needs to be mounted to the interior of the car.
My daughter locked her keys in car. She called local police. They opened door with slim jim, laughing the entire time. Still don't know how they did it. DAD in N.J.
Call a locksmith to unlock the door or buy a slim Jim or Break cheapest window
When trying to unlock your 97 grand am by using a slim jim the first thing you want to decide is, do your locks go up and down or back and forth. This will tell you what direction you need to move the slim jim to get the car to unlock. The next thing you want to do is insert the slim jim under the rubber piece next to the door. Once you find the lock rod , move the slim jim in the direction your locks move.
If your car does not have exterior handles there are several methods you can use to open the car door. These include: Using a flathead screwdriver Using a Slim Jim Using a coat hangerUsing a flathead screwdriver is the simplest way to open the car door. Start by inserting the end of the screwdriver into the space between the car window and the door. Then push the screwdriver further in and pry the door open. Be sure to be gentle when doing this to avoid damaging the car.Using a Slim Jim is another way to open a car door. Start by inserting the Slim Jim between the window and the door. Then move the Slim Jim along the edge of the window until you find a latch. Once you have found the latch pull it up and the door should open.Using a coat hanger is the most difficult way to open a car door without exterior handles. Start by straightening out the hanger and creating a hook on the end. Then insert the hook between the window and the door. Once the hook is inside move it around until you feel it catch onto the latch. Finally pull up on the hanger until the door opens.
To use a slim jim on a Sierra pickup you need to insert it between the car door window and the weather stripping. Next, move it slowly forth and back until it grabs the lock rod.
Probably: Slim Jims never seem to lose their ability to open any car door, even with the advances in locking devices.