Fill to the full mark on the dipstick.
oil
The plug is in the front of the transmission. Get a funnel and fill it up until oil comes out.
The return oil ports are stopped up.
Fill it up with oil...
you fill up the manual gearbox on the top through the beather nut , it has a white plastic cap on the top and use the correct oil
You can top off the oil in the gearbox on a 206 Zest by removing the fill plug on the top of the gearbox and using a funnel to fill with oil.
Yes, but if you're putting in oil after draining it, you do not want to start the engine with no oil in the pan. Instead, add oil until you see it on the dipstick, start it and run it long enough to fill up the oil filters, shut it off, then fill it to the fill line.
CREATES A MESS, and gives you a false reading of oil level
show how to change oil gear box
No, the oil pump will fill it up in a second or two when you start the engine. But if the filter is mounted vertically is sure will not hurt to fill it up before you install it. Know that you must apply a thin layer of oil to the filter gasket before installing it.
I believe it sticks out of the manual transmission bellhousing , on the drivers side