Want this question answered?
For all 1992 Dodge Dakota V6 andV8 engines:All of the water pump bolts are to be torqued to 30 ft. lbs.For 1992 Dodge Dakota 4 cylinder engines:Upper bolts are torqued to 21 ft. lbs.Lower bolts are torqued to 40 ft. lbs.Waterpump housing-to-cover bolts are torqued to 105 inchlbs.
Yes
Drain the water from the cooling system. Remove the water hose from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
It should be 30 ft.lbs
There are three bolts. 10mm socket
heater core is leaking.
go to a mechanic lol
yes
Water pump attaching bolts: 30 ft-lbf Fan-to-water pump attaching bolts: 200 inch-pounds
All weep-hole's should be on the bottom center of the water pump
Follow the lower radiator hose from the radiator. It should connect to the water pump on the engine.
It is on the front of the engine . The water pump bolts to it.