Want this question answered?
Intake valves are in the cylinder heads.
The firewall on any car or truck is the metal area from below the windshield to the frame. The master cylinder and wipers mount on it.
air intake
The throttle body intake will not bolt to the Magnum engine block.
When you stand directly in front of the truck the starter is on your left hand side where the motor and the transmission mount together its realy down there so and its hard to see considering your intake manifold is in the way but if you get under the truck you should be able to see it (PS if your taking the starter out you will most likely have to unbolt the trany from the motor and that can be a pain in the as$ When you stand directly in front of the truck the starter is on your left hand side where the motor and the transmission mount together its realy down there so and its hard to see considering your intake manifold is in the way but if you get under the truck you should be able to see it (PS if your taking the starter out you will most likely have to unbolt the trany from the motor and that can be a pain in the as$
The commercial vacuum company Cleaning Technologies makes a truck mount carpet cleaning machine named the Excalibur. Steambrite manufacturing also makes truck mount carpet cleaning machines.
probably airleak in intake host
it is on your air intake
Truck mount carpet cleaning equipment can be purchased at professional carpet cleaning stores. Some stores are also selling used truck mount carpet cleaning equipment.
sheet metal
right below the intake gotta take intake off to get it off
YES, they are both TBI. You will need to keep everything else with the original truck due to computer issues.