Want this question answered?
All automatic transmissions add fluid in the dipstick tube.
Good question. At the brake fluid resovoir
The brake fluid reservoir is under the hood on the driver side. The fluid is added to the master cylinder with the yellow cap back near the wiper cowl.
ADD BRAKE FLUID
You open the hood, find the brake fluid reservoir, take the cap off and add DOT 3 brake fluid up to the full level.
You can add brake fluid inside the brake fluid reservoir. The reservoir is located on the driver's side under the micro-filter panel.
Locate the brake fluid reservoir, and pour brake fluid in until it's at the appropriate level.
Brake fluid reservoir is located on the firewall next to the steering column. Remove cover top of master cylinder to add brake fluid.
It does not make a difference if the car is hot or cold when you add brake fluid.
The red brake light indicates that the parking brake is on or that the brake fluid is low. Be sure to add the specified brake fluid if you add fluid. Also make sure that you don't allow any dirt to get into the brake fluid and don't overfill the brake fluid either.
Time to add dome brake fluid.
Add brake fluid