Want this question answered?
how do you add transmission fluid on 98 acura cl 3.0
If it is an automatic transmission, you add transmission fluid with a long funnel through the dipstick opening.
On my '94, I went through dipstick. Make sure you get the HONDA/ACURA fluid from the dealer.
You add transmission fluid down the dipstick tube under the hood.
It is important to know where to add the proper fluids in a car. A person can add transmission fluid into the transmission dipstick tube of a 1999 Tacoma 4x4.
You add the fluid down the dipstick tube.
Add automatic transmission fluid through the dip stick tube. No kidding!
The transmission dipstick is on the front of the engine on the drivers side. This is the place to check as well as add transmission fluid.
A 1999 Toyota Camry LE will have a inlet for the transmission fluid located next to the transmission housing. Before adding fluid to the system it is important to drain the older fluid. Be sure to add the correct amount and avoid over filling the system.
Transmission fluid holder? the only place you should be putting transmission fluid is in the transmission. You add it through the same tube that holds your dipstick. Check it warm and add a quart at a time using a funnel.
Same place you check it.
To change transmission fluid on a Acura 3.2 TL you must first check the existing fluid level when the transmission is hot which takes 15 to 20 minutes of driving. Next you will need to dip the dipstick in the transmission fluid to check the level which should be between the third and second level of the dipstick. Use a funnel to add transmission fluid if necessary. Next start the engine and shift into each position and then apply the parking break and turn the engine off. Recheck the transmission fluid and add more if necessary.