The fill plug on the left hand side of the transmission. The fluid level should come to the bottom of the fill plug.
You can check the motor oil or the transmission fluid.
50W if synthetic, 80W is mineral.
50W synthetic, or 70W mineral oil.
Eaton Fuller recommends 50W synthetic. Not sure about other transmission manufacturers.
Eaton-Fuller recommends either 50W synthetic or 80 weight mineral oil.
On all Eaton-Fuller transmissions, the fill plug is on the left side of the transmission. You insert the drive end of a 1/2" socket into it, and turn it counterclockwise to unthread it. That's where the transmission oil goes. Eaton-Fuller recommends you use either 50W synthetic, or 80W if you're going with mineral oil.
If it's an Eaton Fuller, 50W synthetic or 80W mineral.
check
Answer There is a dip stick at the back of the engine. Start your engine first, let it run and check your transmission oil level. You only check transmission oil levels when the engine is running, other oil levels have to be checked when the engine is warm to hot but not running.
It means check your transmission, why not start with the oil.
Most motorcyles have a liguid clutch which means they run in motor oil so when you change your motor oil you are changing your (gearbox) transmission oil and to check your (gearbox) transmission oil level you check the motor oil level.
Check engine oil when you have just finished driving. Check Transmission fluid when the car is running and the transmission in in N (manual) or P (automatic).