There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
most definitely
You'd have to look at the RPO code in the glove compartment to determine this, as there were a couple different options. The gear ratio for the front and rear axle will match.
Yes, (in 4x4 applications the gear ratio/s match the front axle). 2 wd there is no front ratio to match.
An axle ratio is a comparison of the number of ring gear teeth to the number of pinion gear teeth in a differential. For instance, a 3.55 gear ratio means that there are 3.55 ring gear teeth to every 1 pinion tooth.
3.07 or 3.73 to 1. Could be either.
It will be the same as the rear axle. Or take the VIN to the dealer, it is coded into the VIN number.
Open the drivers door and look for an information sticker , it should show the axle code ( 2 numbers or 1 letter and 1 number for the limited slip axle ) The code indicates whether you have a conventional axle or a limited slip axle and what the gear ratio is Submit another question with the axle code and I'll try to find it - Helpfull
There are three ways to find a gear ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
There are three ways to find a gear ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
There are three ways to find a gear ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
No, it does not
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.