0
Where do you find the serpentine belt tension arm to re tighten the serpentine belt on a 1992 Chevy van witha 350 engine and a diagram would help?
Wiki User
∙ 8y ago
, You can finwhat your looking for at http://www.autozone.com sign up is free after you sign up you can put in vehicle info and go to there repair manual for your vehicle.
John
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
Where is the tension release for the alternators belt?
If it is a drive belt and not a serpentine belt is has no tensioner. You manually adjust the tension by normally adjusting tension by moving the alternator. Loosen to bolts holding the alternator in place and then adjust the tension. Tighten the bolts when the tension is right. If it is serpentine belt if you follow the belt around the the engine you will see the tensioner.
How do you tighten the serpentine belt on a 1997 Nissan Pathfinder with a 3.3L V6 engine?
Tension is accomplished with a belt tensioner, it is probably defective and needs replaced.
Where are the bolts needed to tighten the v-belt located on a 98 Plymouth Voyager with 3.0 engine?
if it is a serpentine belt, there is a tension pully that keeps it tight if is a v blet , u generally adjust the tension by moving the alternator
How do you tension serpentine belt on Nissan zd30 engine?
The zd30 has a hydraulic tensioner using an idler pulley to automatically tension the serpentine belt.
How do you install a serpentine belt on a 1994 Z71 305 Chevy engine?
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
Diagram for serpentine on 99 cavalier 2.2?
I need a routing diagram for a serpentine built on a 1999 cavalier 2.2 engine with air codition
How do you replace a serpentine belt on a 1997 Jeep Wrangler?
Loosen the bolts on the alternator (do not take them all the way out), push the alternator toward the engine a little, take off the belt, (make sure you draw the path of the belt first) install the new belt according to the serpentine belt path diagram, and pull the alternator away from the engine (you may need a iron bar to help you be careful not to damage the alternator) and have someone else tighten the bolts of the alternator while you put tension on the alternator to tighten the belt.
Where is the tensioner pulley to tighten the serpentine belt on a 2000 Chevy Silverado?
If you're standing at the front of the truck and looking into the engine compartment the tension pulley is on the left side about half way down.
Where do you get a serpentine belt diagram for a 2000 crown vic 4.6?
Is there not a serpentine belt diagram at the front of the engine compartment , in front of the radiator ( there is on my Ford EXPLORER )
How do i change the accessory belt on a 1997 le Sabre?
Look in the engine compartment for the "serpentine belt" path & tensioner diagram. Release the belt tension at the tensioner, remove & reverse operation.
Serpentine belt diagram 2006 impala V8?
The diagram is not on a decal under the hood or in the engine compartment.
How do you relieve the tension on serpentine belt in a 1990 Corsica 3.1 Lt?
there's a spring loaded tension-er on the right side of the engine.. look at your belt diagram on your engine and you'll see the belt tension-er looking like it's pointing to the northeast of the little diagram.. the easiest way to relieve the pressure is get a crowbar, pull up on the tension-er until it relieves the pressure. I'm actually putting a new belt on my 91' 3.1 Corsica
