Want this question answered?
You will need to go to a dealer or a repair facility that has the Volvo Vida diagnostic computer with the Dice interface. A average diagnostic tool cannot access the SRS codes.
Into the diagnostic connector under the dash on the driver side.
i want to know where the diagnostic plug for that car AutoZone / PepBoys / Kragen / Checker should be able to loan you out the OBDII tool to scan and read for FREE. Then you can clear the code too.
Obd-on board diagnostic. The port is the plug the scan tool or code reader connects to.
It is under the dash on the driver side.
First you remove the cover from the diagnostic port under the driver's side of the dashboard. Then you plug the datalink cable from your scan tool into the diagnostic port. The scan tool will then show the diagnostic codes. Write them down and read a manual to see what has gone wrong.
Plug in a scan tool.
I Own a 2002 Grand Am SE1 and I simply went to Advanced Auto Parts. They will let you borrow a diagnostic handheld tool that you will connect to a connector under the drivers side dash. Then bring the tool back inside. They will get a printout with the diagnosis. They will tell you how the tool works. It's easy.
Once this lamp is triggered by a fault, you will need to have a diagnostic tool to plug into the diagnostics plug to clear the fault.
may be this website may help: plusobd.com/
Use 3/4 " LNKey.
Check behind the ashtray. My diagnostic tool manual suggests that if it's easily found at the bottom of the dash on the driver's or the passenger's side, then to check behind the ashtray. Good luck