I charge the battery on a Chrysler 300 from the jump start posts under the hood. They are on the passenger side on a 2014 model.
If you reverse the connection of the battery charger you will discharge the battery. You may be able to correct the connection and charge it properly, or the battery may be ruined.
Yes. You connect the charger cables to the jump start posts under the hood on the passenger side.
Connect a battery charger to the battery and let it fully charge. Do not charge it with the cars alternator. If it will not accept a charge the battery needs replacing. Connect positive (+) red cable to positive post and black negative (-) cable to negative post. Trickle charge the battery do not fast charge it as the charge won't take. Sure it will start the car a few times but a good charge to a battery is one that is done slowly
Because you didn't charge the battery.
Hook the battery charger to the jump start posts under the hood.
Remove the battery from under the driver's seat. Connect it to a small battery charger suitable for motorbikes. Connect the leads to the terminals. Charge until the meter on the charger shows that the battery is fully charged.
Charge it, test it, replace it.
Remove battery cover and connect charger to side post battery.
Anything that carries that message contains a batterythat can explode or leak if you try to charge the battery, if you connect the battery to something else, or if you throw it into the fire.
Connect a battery charger to battery positive to positive negative to negative
Yes.
Assuming neither battery is used to start the engine, simply connect the positive (+) terminal of the first battery to the positive terminal of the second battery. Then connect the negative (-) terminal of the first battery to the negative terminal of the second battery. Connect the load circuit to the positive and negative terminals of one of the batteries as usual. You may want to charge the batteries separately before making the connection, since connecting a charged battery to a discharged battery will result in a very large current flowing from the charged battery to the discharged battery, possibly damaging the wiring or either battery.