It's put near the Input speed sensor and i sure removed Hoses and it there.
<a href="http://carcomputerexchange.com/Chrysler/cat_1.html">Chrysler ECU Repair</a>
The solenoid pack is activated by the transmission computer to control fluid flow in the transmission. That is how the correct gears are selected.
The transmission solenoid pack is on the front of the transmission case below the cooler hoses.
The starter solenoid is on the starter. The transmission solenoid pack is on the front of the transmission case below the cooler hoses.
The starter solenoid is on the starter. The transmission solenoid pack is on the front of the transmission. The abs solenoids are in the abs unit.
It is on the front of the transmission, under where the cooler lines hook on.
The solenoid pack is on the front of the transmission, just below the cooler hoses.
It is inside the valve body, inside the transmission.
on the drivers side inder the emissions intake on the ooutside of the trans.
No, the solenoid pack is part of the transmission. The powertrain control module is the engine computer.
The transmission control module is inside the driver side fender, in front of the tire.
They are all over the engine and on the front of the transmission.They are all over the engine and on the front of the transmission.
Code P1776 means "A/T Solenoid switch valve latched in the Low/Rev position" and Code P0700 means "Automatic Transmission Control System Malfunction"