The Saturn EGR valve is attached to the head, directly above the transmission bell housing.
It is just to the right attached to the head.
The 95 Saturn SL1 does it too.
exact fit fir the sohc engine is 93 or 94 only
The only hard part is the EGR valve assembly. The head on the newer Saturn is slightly different, making it necessary to find a work-around for the EGR valve.
Around 700 RPM
95 Chevy impala egr valve removal
The EGR valve on a 95 Isuzu Rodeo is located on the back top of the engine. It resembles a cylinder.
On the 1995 Saturn SL1 The oil pressure sending unit is the sensor closest to the alternator. The unit is on the back of the block.
Through the 90's, all SC2 engines were mostly interchangeable. There was a difference in the head, requiring the use of a different EGR valve. If the replacement engine does not use the same EGR valve, it is possible to create an adapter to use the older style EGR valve.
The EGR valve for you 95 Saturn is quite easy to service. Standing in front of your vehicle, look at the valve cover, then just to the right of it should be a round device, shaped somewhat like a flying saucer, but about 4 inches in diameter. That's the EGR valve. It should come off with just a couple bolts, but make sure to disconnect the vacuum line and the electrical connector first.
Dexron III
It needs a new EGR valve.